The Kingston IronKey™ Keypad 200 series are OS-independent hardware-encrypted USB Type-A and USB Type-C®* drives with an alphanumeric keypad for easy-to-use PIN access.

The KP200 incorporates XTS-AES 256-bit hardware-based encryption. It is also FIPS 140-3 Level 3 (pending) certified for military-grade security with enhancements that further elevate the bar for data protection. Its circuitry is covered by a layer of special epoxy that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks against the semiconductor components. The drive is designed to be tamper evident to alert owners. It also incorporates brute force password attack protection, and BadUSB protection with digitally signed firmware. The alphanumeric keypad is coated with a layer of polymer that protects the keys and hides key usage through analysis of fingerprints on the keys.

The KP200 series utilises a built-in rechargeable battery that can be used to unlock the drive first without using any software, and then plug it into any device that supports USB Type-A or USB Type-C mass storage device. This gives users the most flexibility across different platform types and operating systems.

With the Multi-PIN option (Admin/User), the keypad can be used to set up an easy-to-remember but hard-to guess alphanumeric PIN for the Admin or User accounts. Admin can restore a User PIN and provide access to the drive should the User PIN be forgotten, or if the drive is locked after reaching the maximum of 10 User login attempts. With both Admin and User PINs enabled, KP200 will lock the User PIN after 10 failed login attempts; if the Admin PIN is entered incorrectly 10 times in a row, brute force attack protection will crypto-erase the drive, destroy the data forever, and reset it.

The drive also provides two levels of Read-Only (or Write-Protect) modes – a Global mode that can be set by Admin, and a session-only mode that can be set by User. Read-Only modes can protect the drive from malware on untrusted systems. In addition, Admin can load content and set Global Read-Only mode, so that User can access the data but not make any changes.

KP200C offers fast dual channel performance on drives with 64GB-512GB capacities.

FIPS 140-3 Level 3 (Pending) certified
KP200 now meets the new FIPS 140-3 Level 3 military-grade security specifications published by NIST. This is an enhanced version of the FIPS 140-2 specifications that further enhances the drive’s security capabilities and tamper resistance. It includes XTS-AES 256-bit encryption along with brute force and [BadUSB] attack protection with digitally signed firmware. Its circuitry is covered by a layer of special epoxy that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks against the semiconductor components.

OS and device independent
With KP200 utilising a rechargeable battery, the keypad can be used to unlock the drive without using any software, then plug it into any system that supports USB Type-A or USB Type-C mass storage device. This gives users the most flexibility across different platform types and operating systems.

Multi-PIN option
Users have the option to set up a User or an Admin/User mode. Admin can be used to restore a User PIN and provide access to the drive should User PIN be forgotten or if the drive is locked after reaching the maximum of 10 User login attempts.

Global and Session Read-Only (write protect) modes
Both Admin and User can set a session-based Read-Only mode to protect the drive from malware on untrusted systems. Admin can also set a Global Read-Only mode that sets the drive in Read-Only mode until reset.

The Kingston IronKey™ Keypad 200 series are OS-independent hardware-encrypted USB Type-A and USB Type-C®* drives with an alphanumeric keypad for easy-to-use PIN access.

The KP200 incorporates XTS-AES 256-bit hardware-based encryption. It is also FIPS 140-3 Level 3 (pending) certified for military-grade security with enhancements that further elevate the bar for data protection. Its circuitry is covered by a layer of special epoxy that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks against the semiconductor components. The drive is designed to be tamper evident to alert owners. It also incorporates brute force password attack protection, and BadUSB protection with digitally signed firmware. The alphanumeric keypad is coated with a layer of polymer that protects the keys and hides key usage through analysis of fingerprints on the keys.

The KP200 series utilises a built-in rechargeable battery that can be used to unlock the drive first without using any software, and then plug it into any device that supports USB Type-A or USB Type-C mass storage device. This gives users the most flexibility across different platform types and operating systems.

With the Multi-PIN option (Admin/User), the keypad can be used to set up an easy-to-remember but hard-to guess alphanumeric PIN for the Admin or User accounts. Admin can restore a User PIN and provide access to the drive should the User PIN be forgotten, or if the drive is locked after reaching the maximum of 10 User login attempts. With both Admin and User PINs enabled, KP200 will lock the User PIN after 10 failed login attempts; if the Admin PIN is entered incorrectly 10 times in a row, brute force attack protection will crypto-erase the drive, destroy the data forever, and reset it.

The drive also provides two levels of Read-Only (or Write-Protect) modes – a Global mode that can be set by Admin, and a session-only mode that can be set by User. Read-Only modes can protect the drive from malware on untrusted systems. In addition, Admin can load content and set Global Read-Only mode, so that User can access the data but not make any changes.

KP200C offers fast dual channel performance on drives with 64GB-512GB capacities.

FIPS 140-3 Level 3 (Pending) certified
KP200 now meets the new FIPS 140-3 Level 3 military-grade security specifications published by NIST. This is an enhanced version of the FIPS 140-2 specifications that further enhances the drive’s security capabilities and tamper resistance. It includes XTS-AES 256-bit encryption along with brute force and [BadUSB] attack protection with digitally signed firmware. Its circuitry is covered by a layer of special epoxy that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks against the semiconductor components.

OS and device independent
With KP200 utilising a rechargeable battery, the keypad can be used to unlock the drive without using any software, then plug it into any system that supports USB Type-A or USB Type-C mass storage device. This gives users the most flexibility across different platform types and operating systems.

Multi-PIN option
Users have the option to set up a User or an Admin/User mode. Admin can be used to restore a User PIN and provide access to the drive should User PIN be forgotten or if the drive is locked after reaching the maximum of 10 User login attempts.

Global and Session Read-Only (write protect) modes
Both Admin and User can set a session-based Read-Only mode to protect the drive from malware on untrusted systems. Admin can also set a Global Read-Only mode that sets the drive in Read-Only mode until reset.

Kingston IronKey™ Vault Privacy 50 series are premium USB Type-A and USB Type-C®* drives that provide enterprise-grade security with FIPS 197 certified AES 256-bit hardware-encryption in XTS mode, including safeguards against BadUSB with digitally-signed firmware and against brute force password attacks. VP50 has been penetration tested***** (pen tested) for enterprise-grade security. Because it provides encrypted storage under the user’s physical control, the VP50 series is superior to using the internet and Cloud services to safeguard data.

Vault Privacy 50 supports multi-password options (Admin, User and One-Time Recovery) with Complex or Passphrase modes. This enhances the ability to recover access to the data if one of the passwords is forgotten. Traditional Complex mode allows for passwords from 6-16 characters using 3 out of 4 character sets. The new Passphrase mode allows for a numeric PIN, sentence, list of words or even lyrics from 10 to 64 characters long. Admin can enable a User and a One-Time Recovery password, or reset the User password to restore data access. To aid in password entry, the “eye” symbol can be enabled to reveal the typed-in password, reducing typos that lead to failed login attempts. Brute force attack protection locks out User or One-Time Recovery passwords if 10 invalid passwords are entered in a row, and crypto-erases the drive if the Admin password is entered incorrectly 10 times in a row.

To protect against potential malware on untrusted systems, both Admin and User can set Read-Only mode to write-protect the drive; additionally, the built-in virtual keyboard shields passwords from keyloggers or screenloggers.

Organisations can customise and configure VP50 series drives with a product ID (PID) for integration with standard endpoint management software to meet corporate IT and cybersecurity requirement through Kingston’s Customisation Programme.

Small and medium businesses can use the Admin role to manage their drives locally, e.g. use admin to configure or reset employee User or One-Time Recovery Passwords, recover data access on locked drives and comply with laws and regulations when forensics are required.

Vault Privacy 50 offers fast dual-channel performance on all capacities. The drive is waterproof with IPX8 rating****, TAA compliant and assembled in the USA.

Hardware-encrypted USB drive for data protection
Safeguard important data with FIPS 197 certified XTS-AES 256-bit encryption. Built-in protections against BadUSB, brute force attacks and pen tested for enterprise-grade security.

Multi-password option for data recovery
Enable Admin, User and One-Time Recovery passwords. Admin can reset a User password and create a One-Time Recovery password to restore User’s access to data. Brute force attack protection locks out User or One-Time Recovery passwords if 10 invalid passwords are entered in a row, and crypto-erases the drive if the Admin password is entered incorrectly 10 times in a row.

New Passphrase mode
Select between Complex or Passphrase password mode. Passphrases can be a numeric PIN, sentence with space characters, list of words or even lyrics – from 10 to 64 characters long.

Dual read-only (write-protect) settings
Avoid malware attacks with a forced Read-Only mode set by Admin for User, or a session-based Read-Only mode set by Admin or User.

Locally manage drives for small and medium businesses
Use Admin role to locally manage employee User and One-Time Recovery passwords, recover data access on locked drives, and comply with laws and regulations when forensics are required.

Additional security features
Reduce failed login attempts and frustration by enabling “eye” button to view the password typed. Use virtual keyboard to shield password entry from keyloggers and screenloggers.

Experience the combination of elegance and functionality with the DataTraveler SE9 G3 USB 3.2 Gen 1 flash drive, ideal for storing and sharing your data. Rediscover its timeless, award-winning design, now enhanced with high-performance speeds of up to 220MB/s read and 100MB/s write*, ensuring swift and seamless data transfers on Type-A host devices.

Explore the expanded storage options with robust capacities now reaching up to 512GB**, providing ample space for your movies, music and diverse file storage needs.

USB 3.2 Gen 1 speeds
High speeds of up to 220MB/s read and 100MB/s write*.

Premium metal casing for durability and style
An all-metal gold casing that's portable enough to fit in your pocket, backpack or on your keyring loop.

Large capacities for large file storage
Store and share movies, music, raw photos and more with high capacities of up to 512GB**.

Experience the combination of elegance and functionality with the DataTraveler SE9 G3 USB 3.2 Gen 1 flash drive, ideal for storing and sharing your data. Rediscover its timeless, award-winning design, now enhanced with high-performance speeds of up to 220MB/s read and 100MB/s write*, ensuring swift and seamless data transfers on Type-A host devices.

Explore the expanded storage options with robust capacities now reaching up to 512GB**, providing ample space for your movies, music and diverse file storage needs.

USB 3.2 Gen 1 speeds
High speeds of up to 220MB/s read and 100MB/s write*.

Premium metal casing for durability and style
An all-metal gold casing that's portable enough to fit in your pocket, backpack or on your keyring loop.

Large capacities for large file storage
Store and share movies, music, raw photos and more with high capacities of up to 512GB**.

Experience the combination of elegance and functionality with the DataTraveler SE9 G3 USB 3.2 Gen 1 flash drive, ideal for storing and sharing your data. Rediscover its timeless, award-winning design, now enhanced with high-performance speeds of up to 220MB/s read and 100MB/s write*, ensuring swift and seamless data transfers on Type-A host devices.

Explore the expanded storage options with robust capacities now reaching up to 512GB**, providing ample space for your movies, music and diverse file storage needs.

USB 3.2 Gen 1 speeds
High speeds of up to 220MB/s read and 100MB/s write*.

Premium metal casing for durability and style
An all-metal gold casing that's portable enough to fit in your pocket, backpack or on your keyring loop.

Large capacities for large file storage
Store and share movies, music, raw photos and more with high capacities of up to 512GB**.

Experience the combination of elegance and functionality with the DataTraveler SE9 G3 USB 3.2 Gen 1 flash drive, ideal for storing and sharing your data. Rediscover its timeless, award-winning design, now enhanced with high-performance speeds of up to 220MB/s read and 100MB/s write*, ensuring swift and seamless data transfers on Type-A host devices.

Explore the expanded storage options with robust capacities now reaching up to 512GB**, providing ample space for your movies, music and diverse file storage needs.

USB 3.2 Gen 1 speeds
High speeds of up to 220MB/s read and 100MB/s write*.

Premium metal casing for durability and style
An all-metal gold casing that's portable enough to fit in your pocket, backpack or on your keyring loop.

Large capacities for large file storage
Store and share movies, music, raw photos and more with high capacities of up to 512GB**.

Kingston’s DataTraveler® Kyson is a high-performance Type-A USB flash drive with extremely fast transfer speeds of up to 200MB/s read and 60MB/s write*, allowing quick and convenient file transfers. With up to 512GB** of storage, you can store and share photos, videos, music and other content on the go. The capless metal design saves you the trouble of losing a cap, and the functional loop makes it easy to take wherever you go.
DataTraveler® Kyson is a stylish, dependable USB-A Flash drive that comes with a limited 5-year warranty.

Durable and lightweight
The compact storage solution with a stylish and durable metal casing

USB 3.2 Gen 1 speeds
Up to 200MB/s read and 60MB/s write*

Storage on the go
The capless design and functional loop make it easy to take with you

Large capacities
Up to 512GB** for your files, photos, music, videos and more

Kingston IronKey Locker+ 50 USB Flash drives provide consumer-grade security with AES hardware-encryption in XTS mode, including safeguards against BadUSB with digitally-signed firmware and Brute Force password attacks. LP50 is also TAA compliant.

LP50 now supports multi-password (Admin and User) option with Complex or Passphrase modes. Complex mode allows for passwords from 6-16 characters using 3 out of 4 character sets. New passphrase mode allows for a numeric PIN, sentence, list of words or even lyrics from 10 to 64 characters long. Admin can enable a User password, or reset the User password to restore access to data. To aid in password entry, the “eye” symbol can be enabled to reveal the typed in password, reducing typos leading to failed login attempts. Brute Force attack protection locks out User upon 10 invalid password entries in a row and crypto-erases the drive if the Admin password is entered incorrectly 10 times in a row. Additionally, a built-in virtual keyboard shields passwords from keyloggers or screenloggers.

Locker+ 50 is designed for convenience with a small metal casing and built-in key loop to take data anywhere. LP50 also features optional USBtoCloud (by ClevX®) backup to access data on the drive from your personal cloud storage through Google Drive™, OneDrive (Microsoft®), Amazon Cloud Drive, Dropbox™ or Box. LP50 is easy for anyone to setup and use, with no application installation required; all the software and security needed is already on the drive. Works on both Windows® and macOS® so users can access files from multiple systems.

Hardware-encrypted USB 3.1 drive with XTS-AES encryption
Safeguard important data with built-in protections against BadUSB & Brute Force attacks.

Multi-Password (Admin and User) Option with Complex/Passphrase modes
Admin can reset a User password to restore User’s access to data.

New Passphrase Mode
Select between Complex or Passphrase password mode. Passphrases can be a numeric PIN, sentence with space characters, list of words or even lyrics – from 10 to 64 characters long.

Automatic Personal Cloud Backup
Access data stored on IronKey Locker+ 50 from your personal cloud storage.

Additional Security Features
Reduce failed login attempts and frustration by enabling “eye” button to view password typed.
Use virtual keyboard to shield password entry from keyloggers and screenloggers.

DataTraveler Bolt Duo
Live the moment™. Don’t let running out of storage keep you from capturing that perfect moment. The Bolt is an easy way to extend storage space to your iPhone® or iPad®. Think of it like a flash drive for your iPhone. Simply plug it in, download the Bolt app, and then back up your camera roll to the expanded memory.

More pictures
Never miss a moment, snap more pictures with the Bolt

Easy to use app
Too many complex apps out there, not ours! The Bolt app is super easy to use.

No need to wait
In a hurry? Shoot new pictures/videos and save directly to the Bolt

Free up space
Transfer your memories to external storage and make space for new ones.

Portable
The sleek, compact design is easy to take with you using the included accessory.

Kingston IronKey™ Vault Privacy 50 series are premium USB Type-A and USB Type-C®* drives that provide enterprise-grade security with FIPS 197 certified AES 256-bit hardware-encryption in XTS mode, including safeguards against BadUSB with digitally-signed firmware and against brute force password attacks. VP50 has been penetration tested***** (pen tested) for enterprise-grade security. Because it provides encrypted storage under the user’s physical control, the VP50 series is superior to using the internet and Cloud services to safeguard data.

Vault Privacy 50 supports multi-password options (Admin, User and One-Time Recovery) with Complex or Passphrase modes. This enhances the ability to recover access to the data if one of the passwords is forgotten. Traditional Complex mode allows for passwords from 6-16 characters using 3 out of 4 character sets. The new Passphrase mode allows for a numeric PIN, sentence, list of words or even lyrics from 10 to 64 characters long. Admin can enable a User and a One-Time Recovery password, or reset the User password to restore data access. To aid in password entry, the “eye” symbol can be enabled to reveal the typed-in password, reducing typos that lead to failed login attempts. Brute force attack protection locks out User or One-Time Recovery passwords if 10 invalid passwords are entered in a row, and crypto-erases the drive if the Admin password is entered incorrectly 10 times in a row.

To protect against potential malware on untrusted systems, both Admin and User can set Read-Only mode to write-protect the drive; additionally, the built-in virtual keyboard shields passwords from keyloggers or screenloggers.

Organisations can customise and configure VP50 series drives with a product ID (PID) for integration with standard endpoint management software to meet corporate IT and cybersecurity requirement through Kingston’s Customisation Programme.

Small and medium businesses can use the Admin role to manage their drives locally, e.g. use admin to configure or reset employee User or One-Time Recovery Passwords, recover data access on locked drives and comply with laws and regulations when forensics are required.

Vault Privacy 50 offers fast dual-channel performance on all capacities. The drive is waterproof with IPX8 rating****, TAA compliant and assembled in the USA.

Hardware-encrypted USB drive for data protection
Safeguard important data with FIPS 197 certified XTS-AES 256-bit encryption. Built-in protections against BadUSB, brute force attacks and pen tested for enterprise-grade security.

Multi-password option for data recovery
Enable Admin, User and One-Time Recovery passwords. Admin can reset a User password and create a One-Time Recovery password to restore User’s access to data. Brute force attack protection locks out User or One-Time Recovery passwords if 10 invalid passwords are entered in a row, and crypto-erases the drive if the Admin password is entered incorrectly 10 times in a row.

New Passphrase mode
Select between Complex or Passphrase password mode. Passphrases can be a numeric PIN, sentence with space characters, list of words or even lyrics – from 10 to 64 characters long.

Dual read-only (write-protect) settings
Avoid malware attacks with a forced Read-Only mode set by Admin for User, or a session-based Read-Only mode set by Admin or User.

Locally manage drives for small and medium businesses
Use Admin role to locally manage employee User and One-Time Recovery passwords, recover data access on locked drives, and comply with laws and regulations when forensics are required.

Additional security features
Reduce failed login attempts and frustration by enabling “eye” button to view the password typed. Use virtual keyboard to shield password entry from keyloggers and screenloggers.

Kingston IronKey D500S hardware-encrypted USB flash drive FIPS 140-3 Level 3 (pending) certified, XTS-AES 256-bit hardware encrypted, rugged zinc casing
The Kingston IronKey™ D500S/SM USB flash drive features flagship military-grade security that makes IronKey the most trusted brand to safeguard classified information. It is FIPS 140-3 Level 3 (Pending) certified with new enhancements from NIST requiring secure microprocessor upgrades for stronger security and attack protections for government and military uses. Data is encrypted and decrypted on the D500S without any trace left on the host system. Along with hardware-based XTS-AES 256-bit encryption, it features a rugged zinc casing which is waterproof1, dustproof1, crush-resistant and filled with special epoxy to protect internal components from penetration attacks.

IronKey D500S is an essential pillar in meeting Data Loss Protection (DLP) best practices with the toughest military-grade security for compliance with data encryption laws and regulations such as GDPR, HIPAA, SOX and CCPA. D500S offers more features than any other drive in its class, making it a complete security solution for high-value data protection.

D500S self-tests upon bootup and the detection of over-temperature or voltage conditions will lead to drive shutdown. For added peace of mind, D500S incorporates digitally-signed firmware, making it immune to BadUSB malware and brute force attacks. Brute force password attack protection is always on to guard against password guessing and will ultimately crypto-erase the drive if invalid password retries are exceeded.

It offers a Multi-Password option to access data, which supports up to three passwords: Admin, User and One-Time Recovery. Admin can reset a User password and also enable a One-Time Recovery password to restore access if the User password is forgotten.

D500S supports traditional Complex password or Passphrase mode2. Traditional Complex mode allows for passwords from 8-16 characters using 3 out of 4 character sets. Passphrases can be from 10–128 characters long. This could be a sentence with space characters, list of words or even lyrics to make it easier to remember meaningful yet very secure passwords. FBI recommends multi-word passphrases of 15 or more characters as being stronger yet easier to remember than complex passwords.3

D500S includes an industry-first Dual Hidden Partition option where Admin can create two custom-sized secure partitions for Admin and User, thereby allowing for a Hidden File Store that can be used to provision files to the User partition as needed. When using untrusted systems or sharing the drive, the Hidden File Stores keep their data secure and invisible unless properly accessed.

With a special key sequence, Admin can enter a Crypto-Erase password that will crypto-erase the drive, destroy the data forever and reset it to prevent unauthorised access.

To assist users with keyboard issues, all password entry screens include an Eye symbol that will display the password entered to reduce typos. A virtual keyboard is also available in English4 to shield password entry from keyloggers and screenloggers.

D500S also supports two levels of Read-Only (Write-Protect) modes. Both Admin and User can set a session-based Read-Only mode to protect the drive from malware on untrusted systems. Admin can also set a Global Read-Only mode that sets the drive in Read-Only mode until reset.

It also delivers fast performance without compromising security. The drive includes a unique 8-digit serial number that is the same electronically as the number engraved on the casing, with a scannable bar code for drive deployment or auditing purposes.

D500S offers many customisation options, is TAA/CMMC compliant and is assembled in the USA.

Managed model
Kingston IronKey D500SM (M = Managed) drives require SafeConsole5. This allows central management of drive access and usage across a fleet of drives for larger enterprises or governments. An Optional-Managed version is also offered as a customisation.

Military-grade hardware-encrypted USB drive
FIPS 140-3 Level 3 (Pending) certified XTS-AES 256-bit encryption with secure microprocessor upgrades for stronger security. Built-in protections against BadUSB and brute force attacks. New drive self-tests upon bootup and the detection of over-temperature or voltage conditions leads to drive shutdown.

Multi-password option for data recovery
Enable Admin, User and One-Time Recovery passwords. Admin can reset a User password and enable a One-Time Recovery password to restore User’s access to data if the User password is forgotten.

Complex or Passphrase mode
Select between Complex or Passphrase mode. Passphrases can be complete sentences, multiple words or even lyrics that only you remember – from 10 to 128 characters long. An Eye symbol for all entered passwords helps reduce typos.

Industry-first Dual Hidden Partition option
Admin can create two custom-sized Dual Hidden Partitions for Admin and User for a Hidden File Store to keep data secure and invisible unless properly accessed. Dual Hidden Partitions can provide additional security on untrusted systems or when drive sharing is required.

Crypto-Erase Password for emergencies
The Crypto-Erase password is for emergencies where a data breach is anticipated. It will wipe encryption keys, delete all data forever and reset the drive.

Rugged casing built to toughest Ironkey standards
Zinc casing that is waterproof1, dustproof1, crush-resistant and epoxy-filled for physical tamper-resistant security.

Fully customisable
Enable, disable, modify drive features and profile. Co-logo.

Global and Session Read-Only (write protect) modes
Both Admin and User can set a session-based Read-Only mode to protect the drive from malware on untrusted systems. Admin can also set a Global Read-Only mode that sets the drive in Read-Only mode until reset.

The Kingston IronKey™ D500S/SM USB Flash drive features flagship military-grade security that makes IronKey the most trusted brand to safeguard classified information. It is FIPS 140-3 Level 3 (Pending) certified with new enhancements from NIST requiring secure microprocessor upgrades for stronger security and attack protections for government and military uses. Data is encrypted and decrypted on the D500S without any trace left on the host system. Along with hardware-based XTS-AES 256-bit encryption, it features a rugged zinc casing which is waterproof*, dustproof*, crush-resistant and special epoxy-filled to protect internal components from penetration attacks.

IronKey D500S is an essential pillar to meeting Data Loss Protection (DLP) best practices with the toughest military-grade security for compliance with data encryption laws and regulations such as GDPR, HIPAA, SOX and CCPA. D500S offers more features than any other drive in its class, making it a complete security solution for high-value data protection.

D500S self-tests upon bootup and detection of over-temperature or voltage conditions will lead to drive shutdown. For added peace of mind, D500S incorporates a digitally-signed firmware making it immune to BadUSB malware and Brute Force attacks. Brute Force password attack protection is always on to guard against password guessing and will ultimately crypto-erase the drive if invalid password retries are exceeded.

It offers a Multi-Password option to access data which supports up to three passwords: Admin, User, and One-Time Recovery. Admin can reset a User password and also enable a One-Time Recovery password to restore access if the User password is forgotten.

D500S supports traditional Complex password or Passphrase mode***. Traditional Complex mode allows for password from 8-16 characters using 3 out of 4 character sets. Passphrases can be from 10-128 characters long. A sentence with space characters, list of words or even lyrics to simplify remembering meaningful yet very secure passwords. FBI recommends multi-word passphrases of 15 or more characters as stronger yet easier to remember than complex passwords.*****

D500S includes an industry-first Dual Hidden Partition option where Admin can create two custom-sized secure partitions for Admin and User, thereby allowing for a Hidden File Store that can be used to provision files to the User partition as needed. When using untrusted systems or sharing the drive, the Hidden File Stores keep their data secure and invisible unless properly accessed.

With a special key sequence, Admin can enter a Crypto-Erase password that will crypto-erase the drive, destroy the data forever and reset it to prevent unauthorized access.

To assist users with keyboard issues, all password entry screens include an Eye symbol that will display the password entered to reduce typos. A Virtual Keyboard is also available in English**** to shield password entry from keyloggers and screenloggers.

D500S also supports two levels of Read-Only (Write-Protect) Modes. Both Admin and User can set a session-based Read-Only mode to protect the drive from malware on untrusted systems. Admin can also set a Global Read-Only mode that sets the drive in Read-Only mode until reset.

It also delivers fast performance without compromising security. The drive includes a unique 8-digit serial number that is the same electronically as engraved on the casing, with a scannable bar code for drive deployment or auditing purposes.

D500S offers many customization options and is TAA/CMMC Compliant and Assembled in USA.

Managed Model
Kingston IronKey D500SM (M = Managed) drives require SafeConsole**. This allows central management of drive access and usage across a fleet of drives for larger enterprises or governments. An Optional-Managed version is also offered as a customization.

Military-Grade Hardware-Encrypted USB Drive
FIPS 140-3 Level 3 (Pending) certified XTS-AES 256-bit encryption with secure microprocessor upgrades for stronger security. Built-in protections against BadUSB and Brute Force attacks. New drive self-testing upon bootup and detection of over-temperature or voltage conditions leading to drive shutdown.

Multi-Password Option for Data Recovery
Enable Admin, User, and One-Time Recovery passwords. Admin can reset a User password and enable a One-Time Recovery password to restore User’s access to data if the User password is forgotten.

Complex or Passphrase Mode
Select between Complex or Passphrase mode. Passphrases can be complete sentences, multiple words or even lyrics that only you remember - from 10 to 128 characters long. An Eye symbol for all entered passwords helps reduce typos.

Industry-first Dual Hidden Partition Option
Admin can create two custom-sized Dual Hidden Partitions for Admin and User for a Hidden File Store to keep data secure and invisible unless properly accessed. Dual Hidden Partitions can provide additional security on untrusted systems or when drive sharing is required.

Crypto-Erase Password for Emergencies
The Crypto-Erase password is for emergencies where a data breach is anticipated. It will wipe encryption keys, delete all data forever and reset the drive.

Rugged Casing Built to IronKey Toughest Standards
Zinc casing that is waterproof*, dustproof*, crush-resistant and is epoxy-filled for physical tamper-resistant security.

Fully Customizable
Enable, disable, modify drive features and profile. Co-logo.

Global and Session Read-Only (Write Protect) Modes
Both Admin and User can set a session-based Read-Only mode to protect the drive from malware on untrusted systems. Admin can also set a Global Read-Only mode that sets the drive in Read-Only mode until reset.

The Kingston IronKey™ D500S/SM USB Flash drive features flagship military-grade security that makes IronKey the most trusted brand to safeguard classified information. It is FIPS 140-3 Level 3 (Pending) certified with new enhancements from NIST requiring secure microprocessor upgrades for stronger security and attack protections for government and military uses. Data is encrypted and decrypted on the D500S without any trace left on the host system. Along with hardware-based XTS-AES 256-bit encryption, it features a rugged zinc casing which is waterproof*, dustproof*, crush-resistant and special epoxy-filled to protect internal components from penetration attacks.

IronKey D500S is an essential pillar to meeting Data Loss Protection (DLP) best practices with the toughest military-grade security for compliance with data encryption laws and regulations such as GDPR, HIPAA, SOX and CCPA. D500S offers more features than any other drive in its class, making it a complete security solution for high-value data protection.

D500S self-tests upon bootup and detection of over-temperature or voltage conditions will lead to drive shutdown. For added peace of mind, D500S incorporates a digitally-signed firmware making it immune to BadUSB malware and Brute Force attacks. Brute Force password attack protection is always on to guard against password guessing and will ultimately crypto-erase the drive if invalid password retries are exceeded.

It offers a Multi-Password option to access data which supports up to three passwords: Admin, User, and One-Time Recovery. Admin can reset a User password and also enable a One-Time Recovery password to restore access if the User password is forgotten.

D500S supports traditional Complex password or Passphrase mode***. Traditional Complex mode allows for password from 8-16 characters using 3 out of 4 character sets. Passphrases can be from 10-128 characters long. A sentence with space characters, list of words or even lyrics to simplify remembering meaningful yet very secure passwords. FBI recommends multi-word passphrases of 15 or more characters as stronger yet easier to remember than complex passwords.*****

D500S includes an industry-first Dual Hidden Partition option where Admin can create two custom-sized secure partitions for Admin and User, thereby allowing for a Hidden File Store that can be used to provision files to the User partition as needed. When using untrusted systems or sharing the drive, the Hidden File Stores keep their data secure and invisible unless properly accessed.

With a special key sequence, Admin can enter a Crypto-Erase password that will crypto-erase the drive, destroy the data forever and reset it to prevent unauthorized access.

To assist users with keyboard issues, all password entry screens include an Eye symbol that will display the password entered to reduce typos. A Virtual Keyboard is also available in English**** to shield password entry from keyloggers and screenloggers.

D500S also supports two levels of Read-Only (Write-Protect) Modes. Both Admin and User can set a session-based Read-Only mode to protect the drive from malware on untrusted systems. Admin can also set a Global Read-Only mode that sets the drive in Read-Only mode until reset.

It also delivers fast performance without compromising security. The drive includes a unique 8-digit serial number that is the same electronically as engraved on the casing, with a scannable bar code for drive deployment or auditing purposes.

D500S offers many customization options and is TAA/CMMC Compliant and Assembled in USA.

Managed Model
Kingston IronKey D500SM (M = Managed) drives require SafeConsole**. This allows central management of drive access and usage across a fleet of drives for larger enterprises or governments. An Optional-Managed version is also offered as a customization.

Military-Grade Hardware-Encrypted USB Drive
FIPS 140-3 Level 3 (Pending) certified XTS-AES 256-bit encryption with secure microprocessor upgrades for stronger security. Built-in protections against BadUSB and Brute Force attacks. New drive self-testing upon bootup and detection of over-temperature or voltage conditions leading to drive shutdown.

Multi-Password Option for Data Recovery
Enable Admin, User, and One-Time Recovery passwords. Admin can reset a User password and enable a One-Time Recovery password to restore User’s access to data if the User password is forgotten.

Complex or Passphrase Mode
Select between Complex or Passphrase mode. Passphrases can be complete sentences, multiple words or even lyrics that only you remember - from 10 to 128 characters long. An Eye symbol for all entered passwords helps reduce typos.

Industry-first Dual Hidden Partition Option
Admin can create two custom-sized Dual Hidden Partitions for Admin and User for a Hidden File Store to keep data secure and invisible unless properly accessed. Dual Hidden Partitions can provide additional security on untrusted systems or when drive sharing is required.

Crypto-Erase Password for Emergencies
The Crypto-Erase password is for emergencies where a data breach is anticipated. It will wipe encryption keys, delete all data forever and reset the drive.

Rugged Casing Built to IronKey Toughest Standards
Zinc casing that is waterproof*, dustproof*, crush-resistant and is epoxy-filled for physical tamper-resistant security.

Fully Customizable
Enable, disable, modify drive features and profile. Co-logo.

Global and Session Read-Only (Write Protect) Modes
Both Admin and User can set a session-based Read-Only mode to protect the drive from malware on untrusted systems. Admin can also set a Global Read-Only mode that sets the drive in Read-Only mode until reset.

The Kingston IronKey™ D500S/SM USB Flash drive features flagship military-grade security that makes IronKey the most trusted brand to safeguard classified information. It is FIPS 140-3 Level 3 (Pending) certified with new enhancements from NIST requiring secure microprocessor upgrades for stronger security and attack protections for government and military uses. Data is encrypted and decrypted on the D500S without any trace left on the host system. Along with hardware-based XTS-AES 256-bit encryption, it features a rugged zinc casing which is waterproof*, dustproof*, crush-resistant and special epoxy-filled to protect internal components from penetration attacks.

IronKey D500S is an essential pillar to meeting Data Loss Protection (DLP) best practices with the toughest military-grade security for compliance with data encryption laws and regulations such as GDPR, HIPAA, SOX and CCPA. D500S offers more features than any other drive in its class, making it a complete security solution for high-value data protection.

D500S self-tests upon bootup and detection of over-temperature or voltage conditions will lead to drive shutdown. For added peace of mind, D500S incorporates a digitally-signed firmware making it immune to BadUSB malware and Brute Force attacks. Brute Force password attack protection is always on to guard against password guessing and will ultimately crypto-erase the drive if invalid password retries are exceeded.

It offers a Multi-Password option to access data which supports up to three passwords: Admin, User, and One-Time Recovery. Admin can reset a User password and also enable a One-Time Recovery password to restore access if the User password is forgotten.

D500S supports traditional Complex password or Passphrase mode***. Traditional Complex mode allows for password from 8-16 characters using 3 out of 4 character sets. Passphrases can be from 10-128 characters long. A sentence with space characters, list of words or even lyrics to simplify remembering meaningful yet very secure passwords. FBI recommends multi-word passphrases of 15 or more characters as stronger yet easier to remember than complex passwords.*****

D500S includes an industry-first Dual Hidden Partition option where Admin can create two custom-sized secure partitions for Admin and User, thereby allowing for a Hidden File Store that can be used to provision files to the User partition as needed. When using untrusted systems or sharing the drive, the Hidden File Stores keep their data secure and invisible unless properly accessed.

With a special key sequence, Admin can enter a Crypto-Erase password that will crypto-erase the drive, destroy the data forever and reset it to prevent unauthorized access.

To assist users with keyboard issues, all password entry screens include an Eye symbol that will display the password entered to reduce typos. A Virtual Keyboard is also available in English**** to shield password entry from keyloggers and screenloggers.

D500S also supports two levels of Read-Only (Write-Protect) Modes. Both Admin and User can set a session-based Read-Only mode to protect the drive from malware on untrusted systems. Admin can also set a Global Read-Only mode that sets the drive in Read-Only mode until reset.

It also delivers fast performance without compromising security. The drive includes a unique 8-digit serial number that is the same electronically as engraved on the casing, with a scannable bar code for drive deployment or auditing purposes.

D500S offers many customization options and is TAA/CMMC Compliant and Assembled in USA.

Managed Model
Kingston IronKey D500SM (M = Managed) drives require SafeConsole**. This allows central management of drive access and usage across a fleet of drives for larger enterprises or governments. An Optional-Managed version is also offered as a customization.

Military-Grade Hardware-Encrypted USB Drive
FIPS 140-3 Level 3 (Pending) certified XTS-AES 256-bit encryption with secure microprocessor upgrades for stronger security. Built-in protections against BadUSB and Brute Force attacks. New drive self-testing upon bootup and detection of over-temperature or voltage conditions leading to drive shutdown.

Multi-Password Option for Data Recovery
Enable Admin, User, and One-Time Recovery passwords. Admin can reset a User password and enable a One-Time Recovery password to restore User’s access to data if the User password is forgotten.

Complex or Passphrase Mode
Select between Complex or Passphrase mode. Passphrases can be complete sentences, multiple words or even lyrics that only you remember - from 10 to 128 characters long. An Eye symbol for all entered passwords helps reduce typos.

Industry-first Dual Hidden Partition Option
Admin can create two custom-sized Dual Hidden Partitions for Admin and User for a Hidden File Store to keep data secure and invisible unless properly accessed. Dual Hidden Partitions can provide additional security on untrusted systems or when drive sharing is required.

Crypto-Erase Password for Emergencies
The Crypto-Erase password is for emergencies where a data breach is anticipated. It will wipe encryption keys, delete all data forever and reset the drive.

Rugged Casing Built to IronKey Toughest Standards
Zinc casing that is waterproof*, dustproof*, crush-resistant and is epoxy-filled for physical tamper-resistant security.

Fully Customizable
Enable, disable, modify drive features and profile. Co-logo.

Global and Session Read-Only (Write Protect) Modes
Both Admin and User can set a session-based Read-Only mode to protect the drive from malware on untrusted systems. Admin can also set a Global Read-Only mode that sets the drive in Read-Only mode until reset.

The Kingston IronKey™ D500S/SM USB Flash drive features flagship military-grade security that makes IronKey the most trusted brand to safeguard classified information. It is FIPS 140-3 Level 3 (Pending) certified with new enhancements from NIST requiring secure microprocessor upgrades for stronger security and attack protections for government and military uses. Data is encrypted and decrypted on the D500S without any trace left on the host system. Along with hardware-based XTS-AES 256-bit encryption, it features a rugged zinc casing which is waterproof*, dustproof*, crush-resistant and special epoxy-filled to protect internal components from penetration attacks.

IronKey D500S is an essential pillar to meeting Data Loss Protection (DLP) best practices with the toughest military-grade security for compliance with data encryption laws and regulations such as GDPR, HIPAA, SOX and CCPA. D500S offers more features than any other drive in its class, making it a complete security solution for high-value data protection.

D500S self-tests upon bootup and detection of over-temperature or voltage conditions will lead to drive shutdown. For added peace of mind, D500S incorporates a digitally-signed firmware making it immune to BadUSB malware and Brute Force attacks. Brute Force password attack protection is always on to guard against password guessing and will ultimately crypto-erase the drive if invalid password retries are exceeded.

It offers a Multi-Password option to access data which supports up to three passwords: Admin, User, and One-Time Recovery. Admin can reset a User password and also enable a One-Time Recovery password to restore access if the User password is forgotten.

D500S supports traditional Complex password or Passphrase mode***. Traditional Complex mode allows for password from 8-16 characters using 3 out of 4 character sets. Passphrases can be from 10-128 characters long. A sentence with space characters, list of words or even lyrics to simplify remembering meaningful yet very secure passwords. FBI recommends multi-word passphrases of 15 or more characters as stronger yet easier to remember than complex passwords.*****

D500S includes an industry-first Dual Hidden Partition option where Admin can create two custom-sized secure partitions for Admin and User, thereby allowing for a Hidden File Store that can be used to provision files to the User partition as needed. When using untrusted systems or sharing the drive, the Hidden File Stores keep their data secure and invisible unless properly accessed.

With a special key sequence, Admin can enter a Crypto-Erase password that will crypto-erase the drive, destroy the data forever and reset it to prevent unauthorized access.

To assist users with keyboard issues, all password entry screens include an Eye symbol that will display the password entered to reduce typos. A Virtual Keyboard is also available in English**** to shield password entry from keyloggers and screenloggers.

D500S also supports two levels of Read-Only (Write-Protect) Modes. Both Admin and User can set a session-based Read-Only mode to protect the drive from malware on untrusted systems. Admin can also set a Global Read-Only mode that sets the drive in Read-Only mode until reset.

It also delivers fast performance without compromising security. The drive includes a unique 8-digit serial number that is the same electronically as engraved on the casing, with a scannable bar code for drive deployment or auditing purposes.

D500S offers many customization options and is TAA/CMMC Compliant and Assembled in USA.

Managed Model
Kingston IronKey D500SM (M = Managed) drives require SafeConsole**. This allows central management of drive access and usage across a fleet of drives for larger enterprises or governments. An Optional-Managed version is also offered as a customization.

Military-Grade Hardware-Encrypted USB Drive
FIPS 140-3 Level 3 (Pending) certified XTS-AES 256-bit encryption with secure microprocessor upgrades for stronger security. Built-in protections against BadUSB and Brute Force attacks. New drive self-testing upon bootup and detection of over-temperature or voltage conditions leading to drive shutdown.

Multi-Password Option for Data Recovery
Enable Admin, User, and One-Time Recovery passwords. Admin can reset a User password and enable a One-Time Recovery password to restore User’s access to data if the User password is forgotten.

Complex or Passphrase Mode
Select between Complex or Passphrase mode. Passphrases can be complete sentences, multiple words or even lyrics that only you remember - from 10 to 128 characters long. An Eye symbol for all entered passwords helps reduce typos.

Industry-first Dual Hidden Partition Option
Admin can create two custom-sized Dual Hidden Partitions for Admin and User for a Hidden File Store to keep data secure and invisible unless properly accessed. Dual Hidden Partitions can provide additional security on untrusted systems or when drive sharing is required.

Crypto-Erase Password for Emergencies
The Crypto-Erase password is for emergencies where a data breach is anticipated. It will wipe encryption keys, delete all data forever and reset the drive.

Rugged Casing Built to IronKey Toughest Standards
Zinc casing that is waterproof*, dustproof*, crush-resistant and is epoxy-filled for physical tamper-resistant security.

Fully Customizable
Enable, disable, modify drive features and profile. Co-logo.

Global and Session Read-Only (Write Protect) Modes
Both Admin and User can set a session-based Read-Only mode to protect the drive from malware on untrusted systems. Admin can also set a Global Read-Only mode that sets the drive in Read-Only mode until reset.

The Kingston IronKey™ D500S/SM USB Flash drive features flagship military-grade security that makes IronKey the most trusted brand to safeguard classified information. It is FIPS 140-3 Level 3 (Pending) certified with new enhancements from NIST requiring secure microprocessor upgrades for stronger security and attack protections for government and military uses. Data is encrypted and decrypted on the D500S without any trace left on the host system. Along with hardware-based XTS-AES 256-bit encryption, it features a rugged zinc casing which is waterproof*, dustproof*, crush-resistant and special epoxy-filled to protect internal components from penetration attacks.

IronKey D500S is an essential pillar to meeting Data Loss Protection (DLP) best practices with the toughest military-grade security for compliance with data encryption laws and regulations such as GDPR, HIPAA, SOX and CCPA. D500S offers more features than any other drive in its class, making it a complete security solution for high-value data protection.

D500S self-tests upon bootup and detection of over-temperature or voltage conditions will lead to drive shutdown. For added peace of mind, D500S incorporates a digitally-signed firmware making it immune to BadUSB malware and Brute Force attacks. Brute Force password attack protection is always on to guard against password guessing and will ultimately crypto-erase the drive if invalid password retries are exceeded.

It offers a Multi-Password option to access data which supports up to three passwords: Admin, User, and One-Time Recovery. Admin can reset a User password and also enable a One-Time Recovery password to restore access if the User password is forgotten.

D500S supports traditional Complex password or Passphrase mode***. Traditional Complex mode allows for password from 8-16 characters using 3 out of 4 character sets. Passphrases can be from 10-128 characters long. A sentence with space characters, list of words or even lyrics to simplify remembering meaningful yet very secure passwords. FBI recommends multi-word passphrases of 15 or more characters as stronger yet easier to remember than complex passwords.*****

D500S includes an industry-first Dual Hidden Partition option where Admin can create two custom-sized secure partitions for Admin and User, thereby allowing for a Hidden File Store that can be used to provision files to the User partition as needed. When using untrusted systems or sharing the drive, the Hidden File Stores keep their data secure and invisible unless properly accessed.

With a special key sequence, Admin can enter a Crypto-Erase password that will crypto-erase the drive, destroy the data forever and reset it to prevent unauthorized access.

To assist users with keyboard issues, all password entry screens include an Eye symbol that will display the password entered to reduce typos. A Virtual Keyboard is also available in English**** to shield password entry from keyloggers and screenloggers.

D500S also supports two levels of Read-Only (Write-Protect) Modes. Both Admin and User can set a session-based Read-Only mode to protect the drive from malware on untrusted systems. Admin can also set a Global Read-Only mode that sets the drive in Read-Only mode until reset.

It also delivers fast performance without compromising security. The drive includes a unique 8-digit serial number that is the same electronically as engraved on the casing, with a scannable bar code for drive deployment or auditing purposes.

D500S offers many customization options and is TAA/CMMC Compliant and Assembled in USA.

Managed Model
Kingston IronKey D500SM (M = Managed) drives require SafeConsole**. This allows central management of drive access and usage across a fleet of drives for larger enterprises or governments. An Optional-Managed version is also offered as a customization.

Military-Grade Hardware-Encrypted USB Drive
FIPS 140-3 Level 3 (Pending) certified XTS-AES 256-bit encryption with secure microprocessor upgrades for stronger security. Built-in protections against BadUSB and Brute Force attacks. New drive self-testing upon bootup and detection of over-temperature or voltage conditions leading to drive shutdown.

Multi-Password Option for Data Recovery
Enable Admin, User, and One-Time Recovery passwords. Admin can reset a User password and enable a One-Time Recovery password to restore User’s access to data if the User password is forgotten.

Complex or Passphrase Mode
Select between Complex or Passphrase mode. Passphrases can be complete sentences, multiple words or even lyrics that only you remember - from 10 to 128 characters long. An Eye symbol for all entered passwords helps reduce typos.

Industry-first Dual Hidden Partition Option
Admin can create two custom-sized Dual Hidden Partitions for Admin and User for a Hidden File Store to keep data secure and invisible unless properly accessed. Dual Hidden Partitions can provide additional security on untrusted systems or when drive sharing is required.

Crypto-Erase Password for Emergencies
The Crypto-Erase password is for emergencies where a data breach is anticipated. It will wipe encryption keys, delete all data forever and reset the drive.

Rugged Casing Built to IronKey Toughest Standards
Zinc casing that is waterproof*, dustproof*, crush-resistant and is epoxy-filled for physical tamper-resistant security.

Fully Customizable
Enable, disable, modify drive features and profile. Co-logo.

Global and Session Read-Only (Write Protect) Modes
Both Admin and User can set a session-based Read-Only mode to protect the drive from malware on untrusted systems. Admin can also set a Global Read-Only mode that sets the drive in Read-Only mode until reset.

The Kingston IronKey™ Keypad 200 series are OS-independent hardware-encrypted USB Type-A and USB Type-C®* drives with an alphanumeric keypad for easy-to-use PIN access.

The KP200 incorporates XTS-AES 256-bit hardware-based encryption. It is also FIPS 140-3 Level 3 (pending) certified for military-grade security with enhancements that further elevate the bar for data protection. Its circuitry is covered by a layer of special epoxy that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks against the semiconductor components. The drive is designed to be tamper evident to alert owners. It also incorporates brute force password attack protection, and BadUSB protection with digitally signed firmware. The alphanumeric keypad is coated with a layer of polymer that protects the keys and hides key usage through analysis of fingerprints on the keys.

The KP200 series utilises a built-in rechargeable battery that can be used to unlock the drive first without using any software, and then plug it into any device that supports USB Type-A or USB Type-C mass storage device. This gives users the most flexibility across different platform types and operating systems.

With the Multi-PIN option (Admin/User), the keypad can be used to set up an easy-to-remember but hard-to guess alphanumeric PIN for the Admin or User accounts. Admin can restore a User PIN and provide access to the drive should the User PIN be forgotten, or if the drive is locked after reaching the maximum of 10 User login attempts. With both Admin and User PINs enabled, KP200 will lock the User PIN after 10 failed login attempts; if the Admin PIN is entered incorrectly 10 times in a row, brute force attack protection will crypto-erase the drive, destroy the data forever, and reset it.

The drive also provides two levels of Read-Only (or Write-Protect) modes – a Global mode that can be set by Admin, and a session-only mode that can be set by User. Read-Only modes can protect the drive from malware on untrusted systems. In addition, Admin can load content and set Global Read-Only mode, so that User can access the data but not make any changes.

KP200C offers fast dual channel performance on drives with 64GB-512GB capacities.

FIPS 140-3 Level 3 (Pending) certified
KP200 now meets the new FIPS 140-3 Level 3 military-grade security specifications published by NIST. This is an enhanced version of the FIPS 140-2 specifications that further enhances the drive’s security capabilities and tamper resistance. It includes XTS-AES 256-bit encryption along with brute force and [BadUSB] attack protection with digitally signed firmware. Its circuitry is covered by a layer of special epoxy that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks against the semiconductor components.

OS and device independent
With KP200 utilising a rechargeable battery, the keypad can be used to unlock the drive without using any software, then plug it into any system that supports USB Type-A or USB Type-C mass storage device. This gives users the most flexibility across different platform types and operating systems.

Multi-PIN option
Users have the option to set up a User or an Admin/User mode. Admin can be used to restore a User PIN and provide access to the drive should User PIN be forgotten or if the drive is locked after reaching the maximum of 10 User login attempts.

Global and Session Read-Only (write protect) modes
Both Admin and User can set a session-based Read-Only mode to protect the drive from malware on untrusted systems. Admin can also set a Global Read-Only mode that sets the drive in Read-Only mode until reset.

The Kingston IronKey™ Keypad 200 series are OS-independent hardware-encrypted USB Type-A and USB Type-C®* drives with an alphanumeric keypad for easy-to-use PIN access.

The KP200 incorporates XTS-AES 256-bit hardware-based encryption. It is also FIPS 140-3 Level 3 (pending) certified for military-grade security with enhancements that further elevate the bar for data protection. Its circuitry is covered by a layer of special epoxy that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks against the semiconductor components. The drive is designed to be tamper evident to alert owners. It also incorporates brute force password attack protection, and BadUSB protection with digitally signed firmware. The alphanumeric keypad is coated with a layer of polymer that protects the keys and hides key usage through analysis of fingerprints on the keys.

The KP200 series utilises a built-in rechargeable battery that can be used to unlock the drive first without using any software, and then plug it into any device that supports USB Type-A or USB Type-C mass storage device. This gives users the most flexibility across different platform types and operating systems.

With the Multi-PIN option (Admin/User), the keypad can be used to set up an easy-to-remember but hard-to guess alphanumeric PIN for the Admin or User accounts. Admin can restore a User PIN and provide access to the drive should the User PIN be forgotten, or if the drive is locked after reaching the maximum of 10 User login attempts. With both Admin and User PINs enabled, KP200 will lock the User PIN after 10 failed login attempts; if the Admin PIN is entered incorrectly 10 times in a row, brute force attack protection will crypto-erase the drive, destroy the data forever, and reset it.

The drive also provides two levels of Read-Only (or Write-Protect) modes – a Global mode that can be set by Admin, and a session-only mode that can be set by User. Read-Only modes can protect the drive from malware on untrusted systems. In addition, Admin can load content and set Global Read-Only mode, so that User can access the data but not make any changes.

KP200C offers fast dual channel performance on drives with 64GB-512GB capacities.

FIPS 140-3 Level 3 (Pending) certified
KP200 now meets the new FIPS 140-3 Level 3 military-grade security specifications published by NIST. This is an enhanced version of the FIPS 140-2 specifications that further enhances the drive’s security capabilities and tamper resistance. It includes XTS-AES 256-bit encryption along with brute force and [BadUSB] attack protection with digitally signed firmware. Its circuitry is covered by a layer of special epoxy that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks against the semiconductor components.

OS and device independent
With KP200 utilising a rechargeable battery, the keypad can be used to unlock the drive without using any software, then plug it into any system that supports USB Type-A or USB Type-C mass storage device. This gives users the most flexibility across different platform types and operating systems.

Multi-PIN option
Users have the option to set up a User or an Admin/User mode. Admin can be used to restore a User PIN and provide access to the drive should User PIN be forgotten or if the drive is locked after reaching the maximum of 10 User login attempts.

Global and Session Read-Only (write protect) modes
Both Admin and User can set a session-based Read-Only mode to protect the drive from malware on untrusted systems. Admin can also set a Global Read-Only mode that sets the drive in Read-Only mode until reset.

The Kingston IronKey™ Keypad 200 series are OS-independent hardware-encrypted USB Type-A and USB Type-C®* drives with an alphanumeric keypad for easy-to-use PIN access.

The KP200 incorporates XTS-AES 256-bit hardware-based encryption. It is also FIPS 140-3 Level 3 (pending) certified for military-grade security with enhancements that further elevate the bar for data protection. Its circuitry is covered by a layer of special epoxy that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks against the semiconductor components. The drive is designed to be tamper evident to alert owners. It also incorporates brute force password attack protection, and BadUSB protection with digitally signed firmware. The alphanumeric keypad is coated with a layer of polymer that protects the keys and hides key usage through analysis of fingerprints on the keys.

The KP200 series utilises a built-in rechargeable battery that can be used to unlock the drive first without using any software, and then plug it into any device that supports USB Type-A or USB Type-C mass storage device. This gives users the most flexibility across different platform types and operating systems.

With the Multi-PIN option (Admin/User), the keypad can be used to set up an easy-to-remember but hard-to guess alphanumeric PIN for the Admin or User accounts. Admin can restore a User PIN and provide access to the drive should the User PIN be forgotten, or if the drive is locked after reaching the maximum of 10 User login attempts. With both Admin and User PINs enabled, KP200 will lock the User PIN after 10 failed login attempts; if the Admin PIN is entered incorrectly 10 times in a row, brute force attack protection will crypto-erase the drive, destroy the data forever, and reset it.

The drive also provides two levels of Read-Only (or Write-Protect) modes – a Global mode that can be set by Admin, and a session-only mode that can be set by User. Read-Only modes can protect the drive from malware on untrusted systems. In addition, Admin can load content and set Global Read-Only mode, so that User can access the data but not make any changes.

KP200C offers fast dual channel performance on drives with 64GB-512GB capacities.

FIPS 140-3 Level 3 (Pending) certified
KP200 now meets the new FIPS 140-3 Level 3 military-grade security specifications published by NIST. This is an enhanced version of the FIPS 140-2 specifications that further enhances the drive’s security capabilities and tamper resistance. It includes XTS-AES 256-bit encryption along with brute force and [BadUSB] attack protection with digitally signed firmware. Its circuitry is covered by a layer of special epoxy that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks against the semiconductor components.

OS and device independent
With KP200 utilising a rechargeable battery, the keypad can be used to unlock the drive without using any software, then plug it into any system that supports USB Type-A or USB Type-C mass storage device. This gives users the most flexibility across different platform types and operating systems.

Multi-PIN option
Users have the option to set up a User or an Admin/User mode. Admin can be used to restore a User PIN and provide access to the drive should User PIN be forgotten or if the drive is locked after reaching the maximum of 10 User login attempts.

Global and Session Read-Only (write protect) modes
Both Admin and User can set a session-based Read-Only mode to protect the drive from malware on untrusted systems. Admin can also set a Global Read-Only mode that sets the drive in Read-Only mode until reset.

The Kingston IronKey™ Keypad 200 series are OS-independent hardware-encrypted USB Type-A and USB Type-C®* drives with an alphanumeric keypad for easy-to-use PIN access.

The KP200 incorporates XTS-AES 256-bit hardware-based encryption. It is also FIPS 140-3 Level 3 (pending) certified for military-grade security with enhancements that further elevate the bar for data protection. Its circuitry is covered by a layer of special epoxy that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks against the semiconductor components. The drive is designed to be tamper evident to alert owners. It also incorporates brute force password attack protection, and BadUSB protection with digitally signed firmware. The alphanumeric keypad is coated with a layer of polymer that protects the keys and hides key usage through analysis of fingerprints on the keys.

The KP200 series utilises a built-in rechargeable battery that can be used to unlock the drive first without using any software, and then plug it into any device that supports USB Type-A or USB Type-C mass storage device. This gives users the most flexibility across different platform types and operating systems.

With the Multi-PIN option (Admin/User), the keypad can be used to set up an easy-to-remember but hard-to guess alphanumeric PIN for the Admin or User accounts. Admin can restore a User PIN and provide access to the drive should the User PIN be forgotten, or if the drive is locked after reaching the maximum of 10 User login attempts. With both Admin and User PINs enabled, KP200 will lock the User PIN after 10 failed login attempts; if the Admin PIN is entered incorrectly 10 times in a row, brute force attack protection will crypto-erase the drive, destroy the data forever, and reset it.

The drive also provides two levels of Read-Only (or Write-Protect) modes – a Global mode that can be set by Admin, and a session-only mode that can be set by User. Read-Only modes can protect the drive from malware on untrusted systems. In addition, Admin can load content and set Global Read-Only mode, so that User can access the data but not make any changes.

KP200C offers fast dual channel performance on drives with 64GB-512GB capacities.

FIPS 140-3 Level 3 (Pending) certified
KP200 now meets the new FIPS 140-3 Level 3 military-grade security specifications published by NIST. This is an enhanced version of the FIPS 140-2 specifications that further enhances the drive’s security capabilities and tamper resistance. It includes XTS-AES 256-bit encryption along with brute force and [BadUSB] attack protection with digitally signed firmware. Its circuitry is covered by a layer of special epoxy that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks against the semiconductor components.

OS and device independent
With KP200 utilising a rechargeable battery, the keypad can be used to unlock the drive without using any software, then plug it into any system that supports USB Type-A or USB Type-C mass storage device. This gives users the most flexibility across different platform types and operating systems.

Multi-PIN option
Users have the option to set up a User or an Admin/User mode. Admin can be used to restore a User PIN and provide access to the drive should User PIN be forgotten or if the drive is locked after reaching the maximum of 10 User login attempts.

Global and Session Read-Only (write protect) modes
Both Admin and User can set a session-based Read-Only mode to protect the drive from malware on untrusted systems. Admin can also set a Global Read-Only mode that sets the drive in Read-Only mode until reset.

The Kingston IronKey™ Keypad 200 series are OS-independent hardware-encrypted USB Type-A and USB Type-C®* drives with an alphanumeric keypad for easy-to-use PIN access.

The KP200 incorporates XTS-AES 256-bit hardware-based encryption. It is also FIPS 140-3 Level 3 (pending) certified for military-grade security with enhancements that further elevate the bar for data protection. Its circuitry is covered by a layer of special epoxy that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks against the semiconductor components. The drive is designed to be tamper evident to alert owners. It also incorporates brute force password attack protection, and BadUSB protection with digitally signed firmware. The alphanumeric keypad is coated with a layer of polymer that protects the keys and hides key usage through analysis of fingerprints on the keys.

The KP200 series utilises a built-in rechargeable battery that can be used to unlock the drive first without using any software, and then plug it into any device that supports USB Type-A or USB Type-C mass storage device. This gives users the most flexibility across different platform types and operating systems.

With the Multi-PIN option (Admin/User), the keypad can be used to set up an easy-to-remember but hard-to guess alphanumeric PIN for the Admin or User accounts. Admin can restore a User PIN and provide access to the drive should the User PIN be forgotten, or if the drive is locked after reaching the maximum of 10 User login attempts. With both Admin and User PINs enabled, KP200 will lock the User PIN after 10 failed login attempts; if the Admin PIN is entered incorrectly 10 times in a row, brute force attack protection will crypto-erase the drive, destroy the data forever, and reset it.

The drive also provides two levels of Read-Only (or Write-Protect) modes – a Global mode that can be set by Admin, and a session-only mode that can be set by User. Read-Only modes can protect the drive from malware on untrusted systems. In addition, Admin can load content and set Global Read-Only mode, so that User can access the data but not make any changes.

KP200C offers fast dual channel performance on drives with 64GB-512GB capacities.

FIPS 140-3 Level 3 (Pending) certified
KP200 now meets the new FIPS 140-3 Level 3 military-grade security specifications published by NIST. This is an enhanced version of the FIPS 140-2 specifications that further enhances the drive’s security capabilities and tamper resistance. It includes XTS-AES 256-bit encryption along with brute force and [BadUSB] attack protection with digitally signed firmware. Its circuitry is covered by a layer of special epoxy that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks against the semiconductor components.

OS and device independent
With KP200 utilising a rechargeable battery, the keypad can be used to unlock the drive without using any software, then plug it into any system that supports USB Type-A or USB Type-C mass storage device. This gives users the most flexibility across different platform types and operating systems.

Multi-PIN option
Users have the option to set up a User or an Admin/User mode. Admin can be used to restore a User PIN and provide access to the drive should User PIN be forgotten or if the drive is locked after reaching the maximum of 10 User login attempts.

Global and Session Read-Only (write protect) modes
Both Admin and User can set a session-based Read-Only mode to protect the drive from malware on untrusted systems. Admin can also set a Global Read-Only mode that sets the drive in Read-Only mode until reset.

Kingston’s DataTraveler® 70 is a USB 3.2 Gen 1 compliant portable, lightweight USB-C* flash drive. It’s designed to be used with compatible USB-C devices such as notebooks, laptops, tablets and phones. With capacities of up to 256GB**, the DataTraveler 70 is more than capable of expanding your storage for everyday use.

USB-C Storage
For use with USB-C devices like notebooks, tablets, and smartphones.

USB 3.2 Gen 1 speeds
Delivers up to 10X faster transfer speeds than USB 2.0.