Vacuum laser or camera support with dust collector
1. Multipurpose vacuum support bracket incorporating a red
level laser together with horizontal and vertical sprit levels, a dust
collector as well as a 90-degree mounting bracket with 1/4inch screw together
with a 3/8inch adapter and spare suction seal.
2. Detachable Design allows the unit to be used on a wide
range of smooth surfaces such as tiles, most wooden surfaces also concrete and
painted surfaces supporting in excess of 1Kg on the bracket it is a very versatile
tool for mounting lasers and cameras.
3. Long Battery Life, the unit is powered by a built-in
large capacity rechargeable lithium battery making it easy to charge from any
4. The dust collect will collect dust while drilling holes
up to 13mm in diameter it does not have a powered suction facility relying on
the seal around the drill and the sealing ring against the wall to prevent dust
Many of these types of units appear to have a suction type dust collector when in fact they collect the dust by having a seal around the drill bit and seal against the drilling surface.
We tested them and it worked well drilling plaster walls,
bricks and metal containing all the swarf from the drilling.
Item Type: Electric drilling dust collector with a vacuum
laser, spirit levels and mounting bracket
Battery Type: Lithium battery (shipped with built in
Battery Capacity: 1800mAh
Noise Value: = 60DB
Laser Power< 1mw
Working Pressure: -55Kpa
Protection Level: IP54
Laser Wavelength: 650nm
Product Size: Approx. 190x77x52mm / 7.5x3.0x2.0in