Camerafarm Surveillance & Security products from COP Security
Image Product description Price Buy
COP Security S9722A

COP Security Antenna - 5dBi Omnidirectional, SMA Male Connection, To Suit 2.4Ghz Cameras and Equipment - White :: S9722A

5dB omni antenna to suit 2.4GHz cameras and equipment.
Standard SMA connection.

Specifications:
Gain: +5 dB
Connector: SMA Male
Operating frequency: 2.4Ghz
Impedance: 50Ω
Dimensions (mm): 12.5 x 195
Weight: 30g

Dimensions:

Link to product page    $20.65
COP Security S9138E

COP Security 720p AHD / 960H IP66 IR Colour Bullet Camera :: S9138E

 A high performance 720p AHD camera suitable for use with 720p analog DVRs. The design features a switch on the connection cable which toggles between 720p AHD and 960H resolutions for wide compatibility with new and existing DVR systems. It features a 1/4" CMOS sensor offering 1280H x 720V resolution. The in-built IR LEDs provide excellent low light performance with up to 20m illumination range. Lens construction is a standard 3.6mm wide angle design. IP65 weatherproof diecast metal casing for long term use outdoors. 

 Please note: CVBS or 1080p AHD video output is selected via the camera lead joystick
 

  • Image Sensor: 1/4" 1.0 megapixel CMOS
  • Pixels: 1280(H)×720(V)
  • Lens Board Lens: 3.6mm
  • Minimum illumination: 0.001 Lux/F1.2
  • Sync System: Internal, negative sync
  • Signal to Noise Ratio: More than 50dB
  • IR Distance: 20 meters (with ř5x24pcs infrared LED)
  • IR Control: Photodiode AUTO control
  • Video Output: AHD, CVBS
  • Functions: OSD menu, DWDR, 3DNR, Sense-up, OSD
  • Operation Temperature: -10? ~ +50? RH95% Max
  • IP Rating: IP66
  • Power Source: DC12V 500mA
  • Dimension: 86(W) x60(H) x55(D)mm
  • Weight: 400g

*Specifications are subject to change without notice.

 

Link to product page    $52.45
COP Security S8775

COP Security S8775 2.4GHz Audiovisual Transmitter 10mW With Scrambler :: S8775

S8775 2.4GHz Audiovisual Transmitter 10mW With Scrambler
 
Overview
 
Designed for use in conjunction with the S 8795 receiver, this transmitter allows a single channel of video and audio to be encrypted and transmitted to an S8795 receiver for decryption and recording or monitoring.

Suitable for use in video surveillance systems where security is paramount. It also features an alarm input for remote trigggering by a PIR or alarm system.

This unit has a power pass through connector so that the camera and transmitter can be powered by a single power supply.

Requires a 12V dc plugpack
 
Specifications
 
  • RF Channel frequency: 2.414GHz, 2.432GHz, 2.45GHz, 2.468GHz
  • RF Impedance: 50 typical
  • Range (Line of sight): 210m
  • Power supply: 12Vdc 1.5A
  • Current consumption: 95mA typical, 500mA start up
  • DC Output: 12V dc 750mA
  • RF Output power: 10mW
  • Video input: 1V p-p composite 75
  • Audio input: 2V p-p typical, 2.7V p-p max 600
  • Alarm input: TTL/CMOS level detection
  • Dimensions: 86L x 30H x 110D mm
 
Specifications are subject to change without notice.
Link to product page    $134.10
COP Security P6717

COP Security DC Power Lead - 2.1mm DC Plug to 2.1mm DC Plug - 50cm :: P6717

2.1mm DC plug to 2.1mm DC plug, 0.5m. Introduced to the range to support the powering of our range of half rack mount Solutions® products.
Link to product page    $5.85
COP Security P6715

COP Security DC Power Lead Splitter - 1x 2.1 DC to 2x 2.1 DC Plug - 20cm :: P6715

A black 2m, 2.1mm DC Lead consisting of 2 sockets to 2 plugs.
Link to product page    $8.00
COP Security S9861

COP Security 4 Way Video Splitter w. Amplifier :: S9861

Single input to four output video only splitter.
Distributes video to four devices. BNC connectors.
Power supply:12VDC @ 500mA
Dimensions:49 x 42 x 50mm
Link to product page    $71.80
COP Security S9860

COP Security 2 Way Video Splitter w. Amplifier :: S9860

Single input to two output video distributor.
Transmits video to two devices to a maximum distance of 300 metres.
Compatible with NTSC or PAL systems.
Video input:0.8 to 1.2V P-P
Video output:1V P-P
Bandwidth:5MHz
Power supply:12VDC @ 100mA
Dimensions:49 x 42 x 50mm
Link to product page    $49.45
COP Security S9785

COP Security Surge Lightning Arrestor - Male BNC to Female BNC, 5000A :: S9785

Protect your cameras and associated equipment from high voltage surges with these protection devices. The system appears as an open circuit to transient high voltage surges and prevents these from passing into equipment.
Link to product page    $40.20
COP Security S9757

COP Security 9 Way Terminal Block Bus Bar


- Distributes a Single Power input to Nine Outputs :: S9757
Distributes a single power input to nine outputs. With in-built PTC fuses on each output for short circuit protection.
Link to product page    $46.15
COP Security S9755

COP Security 8 Way Terminal Block Bus Bar


- Distributes a Single Power input to Eight Outputs :: S9755
Distributes a single power input to eight outputs. Perfect for splitting a single camera supply to power up to eight cameras.
Link to product page    $34.45
COP Security S9750

COP Security Voltage Converter Cable - 24V AC/DC-12V DC :: S9750

This adaptor will convert 20-28V AC or 16-30V DC to a regulated 12V DC output suitable for CMOS and CCD cameras. Supplied with 2.1mm DC output plug and 2 pin terminal block input. Approx length 60mm.
Link to product page    $25.10
COP Security S9234A

COP Security Multi Channel AV to RF Modulator - Channel Select Ch 21-107, Requires M9271 Plugpack :: S9234A

Suitable for switching between an AV source and a TV aerial. Great for connecting older TV sets to new AV equipment. Could be used for connecting DVD players, game consoles, video or security cameras. Frequency agile over channels 21 to 107. Channel is indicated via the front panel LED display. Requires 12VDC 300mAh (M 9271 plugpack).
Link to product page    $116.75
COP Security S9722

COP Security Antenna - 5dBi Omnidirectional, SMA Male Connection, To Suit 2.4Ghz Cameras and Equipment - Black :: S9722

5dB omni antenna to suit 2.4GHz cameras and equipment.
Standard SMA connection.

Specifications:
Gain: +5 dB
Connector: SMA Male
Operating frequency: 2.4Ghz
Impedance: 50Ω
Dimensions (mm): 12.5 x 195
Weight: 30g

Dimensions:

Link to product page    $20.65
COP Security S9515

COP Security Steel Wall/Ceiling "T" CCTV Bracket - Up to 3kg Max Per Mount :: S9515

Suits two cameras on independent swivel mounts
Link to product page    $54.65
COP Security S9548A

COP Security Steel Ceiling "J" CCTV Bracket - Up to 4kg Max :: S9548A


Wall mount bracket designed for use with enclosed cameras. It allows the cable to be threaded through the bracket for a tamper-proof connection. Mounting hardware included. 4kg max. Extends 242mm from ceiling. Camera mounts 204mm from vertical support.

Link to product page    $45.95
COP Security S9789

COP Security Adaptor Ring - Alows a C/CS Lens Equipped Camera onto a Telescope :: S9789

Allows the mounting of a C/CS lens equipped camera onto a telescope.
Link to product page    $40.20
COP Security S9787

COP Security Adaptor Ring - Allows the Mounting of a `C` Lens onto a `CS` Camera :: S9787

Allows the mounting of a “C” lens to a “CS” camera
Link to product page    $5.70
COP Security S9054

COP Security Colour Camera - 1/4" CCD, 480 Lines Resolution, C/CS Mount :: S9054

Professional standard camera with high resolution CCD sensor for sharp clear video. This camera uses C or CS mount lenses, available separately. With 2x digital zoom capability, mirror function and auto gain control.

Features:
• 1V p-p 75Ω video output
• Selectable (on/off) backlight compensation
• Auto electronic shutter
• Auto white balance

Specifications
Pixels: 795 x 596
Resolution: 520 lines
Input Voltage: 12VDC Reg.
Image Sensor: 1/3" CCD
Dimensions (LxHxWmm): 38 x 40 x 28
Electronic Shutter: 1/120000
S/N Ratio: >46dB
Light Sensitivity: 0.03 Lux
Gain Control: Auto
Suggested power supply: M9243

Link to product page    $161.10
COP Security S9066

COP Security CCTV - Small Aluminium Bracket - 110mm :: S9066

These camera brackets allow the mounting of a CCD camera to a wall. The S 9066 small bracket may be used with the included extension post to extend the mounting height to 110mm.



Option for only 50mm length if required

Link to product page    $7.95
COP Security S9138

COP Security Colour Camera - 1/4" CCD, 350 Lines Resolution, Infrared, Weatherproof IP65 :: S9138

Pixels: 500 x 582
Sync: Internal
Resolution: 350 lines
S/N Ratio (dB): 50
Video output: 1V p-p, 75 Ohms
Input voltage: 12V DC (Recommended plugpack, M 9449 Regulated 12V 500mA)
Video system: PAL
Dimensions: 53 x 88
Focal length (mm): 3.6 / f 1.8
Light Sensitivity: 0 Lux with IR on

Not suitable for use with the S 8774 2.4GHz Wireless AV transmitter.
Link to product page    $171.00
COP Security S9137A

COP Security Colour Camera - 1/4" CCD, 380 Lines Resolution, Weatherproof IP65, Vari-Focal Lens, Auto Iris, Infrared :: S9137A

Suited for outdoor installations requiring a high degree of focal adjustment coupled with high
quality CCD sensor. The unique all-metal weatherproof enclosure (IP65) allows easy adjustment
even after the unit is mounted to the wall/ceiling. Includes heavy duty bracket. IR illumination is provided by 13 LEDs.

Specifications:
Resolution: 380 lines
S/N Ratio: >46dB
Input Voltage: 12VDC Reg.
Image Sensor: 1/3" CCD
Dimensions: 64Ř x 103
Focal Length: 2.7 to 12
Light Sensitivity: 0 Lux
A/V Connectors: BNC
Suggested power supply: M9243

Link to product page    $424.00
COP Security S9147

COP Security Colour Camera - 1/4" CCD, 420 Lines Resolution, Infrared, Vari-Focal Lens, Weatherproof Housing :: S9147

CCD camera in a full size weatherproof outdoor aluminium housing. IR illumination up to approximately 15 metres is provided by 84 LEDs. Features a vari-focal lens, Sony Super-HAD sensor and built in heater with fan. Supplied with mounting bracket.

Specifications
Pixels: 512 x 582
Resolution: 420 lines
S/N Ratio: >46dB
Input Voltage: 12VDC Reg.
Image Sensor: 1/4" CCD
Dimensions: 120 x 270 x 115
Focal Length: 6-15mm (vari-focal)
Light Sensitivity: 0 Lux
A/V Connectors: BNC
Suggested power supply: M9449

Link to product page    $251.10
COP Security S9127

COP Security Colour Dome Camera - 1/3" CCD, 550 Lines Resolution, High Resolution, Vari-Focus Lens :: S9127

Incorporating Sony ® Super HAD CCD pick up devices and offering 480 lines resolution these cameras are designed for professional installations. With a light requirement of just 0.1 Lux they can operate effectively in low light conditions. They also feature on/off selectable AGC and back light compensation. The S 9127 also features a variable focus auto iris lens (3.7-12mm). Requires M 9243 12V DC 300mA regulated supply.

Specifications:
Pixels: 795 x 596
Sync: Internal
Resolution. 550 lines
S/N Ratio: 48dB
Video Output: 1V p-p 75 Ohm
Input Voltage: 12V DC Reg
Video System: PAL
Dimensions(mm): 140 x 90
Focal Length(mm): 3.7-12mm
Viewing Angle: 42-76 degrees
Light Sensitivity: 0.1 Lux

Link to product page    $383.70
COP Security S9179

COP Security Dummy Professional Camera :: S9179


This dummy camera gives the impression that the surrounding area is under CCD surveillance. Appears the same as a fully functional camera. The perfect, inexpensive theft deterrent. Dimensions: 110 x 51 x 51 mm.

Link to product page    $26.95