Lenses products from Canon

 

Designed to prevent stray light from entering the lens in order to keep unwanted glare from affecting your photographs.

 

Compatible with: EF-S 18-55mm f/3.5-5.6 IS STM Lens

The EF 2x II doubles the focal length of any lens it's mounted to, and reduces its effective aperture by two stops. The effective aperture of the lens is increased by one or two stops respectively. Autofocusing does not operate if the effective maximum aperture is greater than f/5.6 (greater than f/8 on the EOS 1V and EOS 3).

A totally new 7-element optical design for this version II extender means superior image quality combined with a doubling of the lenss marked focal length (with a two-stop reduction in effective aperture). Compatible with the same lenses as the 1.4x II extender, the EF 2x II still allows autofocus with any EOS body when used with a lens f/2.8 or faster. It shares the improved anti-reflection internal design and weather-resistant exterior, including seals at its front and rear lens mounts matching those on Canons newest professional lenses and camera bodies.

• Dust and moisture resistant construction
• Extends the master lens focal length by 2.0x
• Minimum loss of lens performance
• Reduces inner reflection for higher image quality

 

    * Designed to prevent unwanted stray light from entering the lens
    * Ensures no problems with vignetting or motor functions
    * Added benefit of extra protection from accidental impact

One of the most important accessories for each lens you own. A lens hood provides multiple functions: it shades the lens from stray light, improving your contrast and image quality; in inclement weather, it can assist in keeping moisture or wind-blown debris off the lens; and it protects the front barrel from the inevitable impacts against walls, door frames, and other real-life obstacles. Almost all EF and TS-E lenses have a Canon lens hood engineered specifically for it.

RF3 Camera Cover (Body Cap) for EOS Bodies & Extension Tube Fronts

The Canon Extension Tube EF 25 is installed between the prime lens and the camera body. It is a simple way to enable close-ups at high magnifications by increasing the distance between the lens and the film plane enabling focusing at closer distances than otherwise possible.

 

 

Weight: 125g

 

Lens Construction (elements/groups): Extension Tube EF 25 can be used with EF lenses except the EF 14mm f/2.8L, 15mm f/2.8, 20mm f/2.8, 24mm f1.4L, 50mm f/1.0L, 17-35mm f/2.8L at the shorter focal lengths, 20-35mm f/3.5-4.5 at the shorter focal lengths, TS-E 45mm, and lenses which cannot be focused manually

 

Max. Diameter x Length: 67.6x27.3mm

The Extension Tube EF 12 is installed between the prime lens and the camera body. It is a simple way to enable close-ups at high magnifications by increasing the distance between the lens and the film plane enabling focusing at closer distances than otherwise possible.

 

This close-up accessory maintains full electronic coupling between the camera body and lens and can be used with most EF lenses. Ideal for nature photography with single focal length telephotos. Manual focusing is recommended.

 

 

Weight: 66g

 

Lens Construction (elements/groups): Extension Tube EF 12 can be used with EF lenses except the EF 14mm f/2.8L, 50mm f/1.0L, and lenses which cannot be focused manually.

 

Max. Diameter x Length: 66.5x12.3mm

Hoods are one of the most important accessories for each lens you own. A lens hood provides multiple functions: it shades the lens from stray light, improving your contrast and image quality; in inclement weather, it can assist in keeping moisture or wind-blown debris off the lens; and it protects the front barrel from the inevitable impacts against walls, door frames, and other real-life obstacles.

 

The Canon EW-83H Lens Hood is a short, conical-shaped "tube" that attaches to the front of the Canon EF 24-105mm f/4L IS USM Lens to shield it from extraneous light. This inexpensive accessory is a must-have for your camera system, as it helps prevent lens flare, ghost images, loss of contrast and other unwanted light effects.

 

 

Lens hoods are primarily designed to prevent unwanted stray light from entering by extending and shading the end of the lens, ensuring no problems with vignetting or motor functions. Additionally, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact. Lens hoods match the specific focal length of the lens it was designed for.

Specially designed Lens Hood for the CANON 24-79 f/2.8L Lens (CAN 24-70/LSM) / Prevents glare and unwanted light flare

 

One of the most important accessories for each lens you own, a lens hood provides multiple functions: it shades the lens from stray light, improving your contrast and image quality; in inclement weather, it can assist in keeping moisture or wind-blown debris off the lens; and it protects the front barrel from the inevitable impacts against walls, door frames, and other real-life obstacles.

Hoods are one of the most important accessories for each lens you own. A lens hood provides multiple functions: it shades the lens from stray light, improving your contrast and image quality; in inclement weather, it can assist in keeping moisture or wind-blown debris off the lens; and it protects the front barrel from the inevitable impacts against walls, door frames, and other real-life obstacles.

 

Hoods are one of the most important accessories for each lens you own. A lens hood provides multiple functions: it shades the lens from stray light, improving your contrast and image quality; in inclement weather, it can assist in keeping moisture or wind-blown debris off the lens; and it protects the front barrel from the inevitable impacts against walls, door frames, and other real-life obstacles.

 

 

Lens hoods are primarily designed to prevent unwanted stray light from entering by extending and shading the end of the lens, ensuring no problems with vignetting or motor functions. Additionally, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact. Lens hoods match the specific focal length of the lens it was designed for.

This lens hood fits the following Canon lens:

• EF 70 to 200mm f2.8L USM

 

The Precision Design ET-67 Lens Hood is primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.Dedicated lens hoods, such as the Canon ET-67, are designed to match the specific focal length of the lens it was designed for.

 

Compatible with the following Canon lenses:

 

A lens hood is one of the most important accessories for each lens you own. A lens hood provides multiple functions: it shades the lens from stray light, improving your contrast and image quality; in inclement weather, it can assist in keeping moisture or wind-blown debris off the lens; and it protects the front barrel from the inevitable impacts against walls, door frames, and other real-life obstacles.

Lens hoods are primarily designed to prevent unwanted stray light from entering by extending and shading the end of the lens, ensuring no problems with vignetting or motor functions. Additionally, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact. Lens hoods match the specific focal length of the lens it was designed for.

This lens hood fits the following Canon lenses:

• EF 70-300mm f4.5-5.6 DO IS USM
• EF 70-300mm f4-5.6 IS USM

Canon ET-60 Lens Hood for EF 55-250mm f/4-5.6 IS, EF 75-300mm f/4-5.6 III USM & EF 75-300mm f/4-5.6 III

A lens hood is one of the most important accessories for each lens you own. A lens hood provides multiple functions: it shades the lens from stray light, improving your contrast and image quality; in inclement weather, it can assist in keeping moisture or wind-blown debris off the lens; and it protects the front barrel from the inevitable impacts against walls, door frames, and other real-life obstacles.

 

provides a 58mm filter mount for adding effects filters or other lens accessories to the

 for PowerShot A640, A630, A620 and A610 Digital Cameras