Cases & Bags products from Pelican

Pelican iM2370-FOAM 4 pc. Replacement Foam Set for iM2370 Storm Laptop Case

Compatibility

• iM2370 Storm Laptop Case

Pelican iM3200-FOAM 4 pc. Replacement Foam Set for iM3200 Storm Long Case

Compatibility

• iM3200 Storm Long Case

Pelican iM2975-FOAM 8 pc. Replacement Foam Set for iM2975 Storm Travel Case

Compatibility

• iM2975 Storm Travel Case

Pelican iM2950 Storm Travel Case - No Foam - Yellow

Description

The Pelican Storm Case has the same legendary DNA as our Pelican Protector Case, with one primary difference: A unique Press and Pull latch that locks automatically, but open with a light touch.

Guaranteed for life, the Pelican Storm case is made in the USA and engineered using the finest components.

• Interior: 29" x 18" x 10.5"
• Five Press & Pull Latches
• Two Double-layered, Soft-grip Handles
• Two Padlockable Hasps
• Powerful Hinges
• O-ring seal
• Guaranteed For Life

Pelican 1095-400-000 Foam Set For 1096 Micro Case

Description

The Pelican 1096 foam set is a 3 piece replacement set for the Pelican 1095 case.

• 3 Piece Replacement Foam Set
• Pick & Pluck cubes for easy customisation
• Convoluted Lid Layer
• Layer For Bottom Of Case

The Pelican Storm Case has the same legendary DNA as our Pelican Protector Case with one primary difference: A unique Press and Pull latch that locks automatically, but opens with a light touch. Guaranteed for life, the Pelican Storm case is made in the USA and engineered using the finest components.

• Two Press &Pull Latches
• Lightweight Strong HPX Resin
• Watertight, crushproof and dustproof
• Double-layered, Soft-grip Handle
• Vortex Valve
• Two Padlockable Hasps
• Powerful Hinges
• Guaranteed for life
• Dimensions: Interior (L × W × D) 18.00" x 13.00" x 6.70" (45.7 x 33 x 17 cm)
• Dimensions: Exterior (L × W × D) 19.20" x 15.20" x 7.30" (48.8 x 38.6 x 18.5 cm)

Pelican iM2100 Storm Case - Small - Black

Description

The Storm iM2100 is lightweight but virtually indestructible! Constructed of injection-molded lightweight HPX high-performance resin, it resists impacts even at low temperatures. It also meets current FAA requirements for carry-on bags. Pack your gear up tight and keep it safely by your side when you fly.

Features

• HPX High Performance Resin Shell
• Press & Pull Latches
• O-Ring Waterproof Seal
• Double-layered, Soft-grip Handle
• Two Padlockable Hasps
• Vortex Pressure Equalization Valve
• Impact Absorbing Corners
• Chemical-resistant, Corrosion-resistant, Airtight, Watertight, Dustproof, Crushproof

Interior Dimensions: 13 x 9.2 x 6"

Specifications

• 4 strong polyurethane wheels with stainless steel bearings
• Watertight, crushproof and dustproof
• 2 level Pick N Pluck with convoluted lid foam
• Open cell core with solid wall design - strong, light weight
• Retractable extension handle
• Fold down handles
• Easy open Double Throw latches
• Stainless steel hardware and padlock protectors
• Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
• O-ring seal
• Lifetime Guarantee of Excellence
• Dimensions: Interior (L x W x D) 28.57" x 17.52" x 10.65" (72.6 x 44.5 x 27.1 cm)
• Dimensions: Exterior (L x W x D) 31.59" x 20.47" x 12.45" (80.2 x 52 x 31.6 cm)

• 4 level Pick N Pluck with convoluted lid foam
• Strong polyurethane wheels with stainless steel bearings
• Watertight, crushproof and dustproof
• Open cell core with solid wall design - strong, light weight
• Retractable extension handle
• Fold down handles
• Easy open Double Throw latches
• Stainless steel hardware and padlock protectors
• Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
• O-ring seal
• Lifetime Guarantee of Excellence
• Dimensions: Interior (L x W x D) 21.48" x 16.42" x 12.54" (54.6 x 41.7 x 31.9 cm)
• Dimensions: Exterior (L x W x D) 24.76" x 19.57" x 13.90" (62.9 x 49.7 x 35.3 cm)

• Pick N Pluck with convoluted lid foam
• Watertight, crushproof, and dust proof
• Open cell core with solid wall design - strong, light weight
• Comfortable rubber over-molded handle
• Easy open Double Throw latches
• Stainless steel hardware and padlock protectors
• Automatic Pressure Equalisation Valve - balances interior pressure, keeps water out
• O-ring seal
• Lifetime Guarantee of Excellence
• Dimensions: Interior (L x W x D) 16.75" x 11.18" x 6.12" (42.5 x 28.4 x 15.5 cm)
• Dimensions: Exterior (L x W x D) 18.50" x 14.06" x 6.93" (47 x 35.7 x 17.6 cm)

• Double safety locking latches with keys
• Pick N Pluck with convoluted lid foam
• Open cell core with solid wall design - strong, light weight
• Comfortable rubber over-molded handle
• Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
• O-ring seal
• Stainless steel hardware
• Lifetime Guarantee of Excellence
• Dimensions: Interior (L x W x D) 15.70" x 10.70" x 3.87" (39.9 x 27.2 x 9.8 cm)
• Dimensions: Exterior (L x W x D) 16.88" x 13.23" x 4.47" (42.9 x 33.6 x 11.4 cm)

• Pick N Pluck with convoluted lid foam
• Watertight, crushproof and dustproof
• Open cell core with solid wall design - strong, light weight
• Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
• O-ring seal
• Stainless steel hardware
• Lifetime Guarantee of Excellence
• Dimensions: Interior (L x W x D) 8.29" x 5.79" x 3.75" (21.1 x 14.7 x 9.5 cm)
• Dimensions: Exterior (L x W x D) 9.44" x 7.80" x 4.29" (24 x 19.8 x 10.9 cm)

• Pick N Pluck with convoluted lid foam
• Watertight, crushproof, and dustproof
• Open cell core with solid wall design - strong, light weight
• Automatic Pressure Equalisation Valve - balances interior pressure, keeps water out
• O-ring seal
• Stainless steel hardware
• Lifetime Guarantee of Excellence
• Dimensions: Interior (L×W×D) 7.29" x 4.78" x 3.33" (18.5 x 12.1 x 8.5 cm)
• Dimensions: Exterior (L×W×D) 8.41" x 6.76" x 3.87" (21.4 x 17.2 x 9.8 cm)

• Case is able to be submerged under 1 meter of water for up to 30 minutes in accordance with IP67 testing parameters
• Watertight, crushproof, and dustproof
• Rubber liner for extra protection doubles as o-ring seal
• Easy open latch
• Carabiner
• Stainless steel hardware
• Lifetime Guarantee of Excellence
• Dimensions: Interior (L x W x D) 4.37" x 2.87" x 1.68" (11.1 x 7.3 x 4.3 cm)
• Dimensions: Exterior (L x W x D) 5.88" x 4.06" x 2.12" (14.9 x 10.3 x 5.4 cm)

Sensitive equipment needs protection and since 1976 the answer has been the Pelican Protector Case. These cases are designed rugged and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived. Made in the USA, these tough cases are designed with an automatic purge valve that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.

• Watertight, crushproof and dustproof
• 2 level Pick N Pluck with convoluted lid foam
• Open cell core with solid wall design - strong, light weight
• Comfortable rubber over-molded handle
• Stainless steel hardware and padlock protectors
• Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
• O-ring seal
• Lifetime Guarantee of Excellence
• Dimensions: Interior (L x W x D) 21.51" x 16.54" x 7.99" (54.6 x 42 x 20.3 cm)
• Dimensions: Exterior (L x W x D) 24.39" x 19.36" x 8.79" (62 x 49.2 x 22.3 cm)

• Pick N Pluck with convoluted lid foam
• Watertight, crushproof and dustproof
• Open cell core with solid wall design - strong, light weight
• Comfortable rubber over-molded handle
• Easy open Double Throw latches
• Stainless steel hardware and padlock protectors
• Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
• O-ring seal
• Lifetime Guarantee of Excellence
• Dimensions: Interior (L x W x D) 18.06" x 12.89" x 6.72" (45.9 x 32.7 x 17.1 cm)
• Dimensions: Exterior (L x W x D) 19.78" x 15.77" x 7.41" (50.2 x 40.1 x 18.8 cm)

Pelican Classic V Series Rackmount Case - 7U, Black

Features

• CLASSIC V-SERIES 7U, 2418-02/35/05
• Engineered to provide secure transport for rack mountable electronics
• Available in 3U, 4U, 5U, 7U, and 9U
• Weight ranges for 3U – 5U = 80-100 lbs. per case
• Weight ranges for 7U – 9U = 100-170 lbs. per case
• Fixed square hole frame for universal equipment fit
• 2” Front Lid, 5” Rear Lid
• 4 removable heavy duty bottom casters
• Stainless Steel Handles
• Lid Hangers for lid storage while in use
• Anti-reflective black hardware
• Coupling catches for secure stacking
• Sealed gasket and PRV keeps container watertight and eliminates over pressurization
• Choice of SAE 10-32 or Metric M6 clip nuts for even more flexibility in mounting equipment
• REACH and RoHs compliant
• Colo Black

PELICAN-HARDIGG™ V-SERIES RACK MOUNT CASES

Off-the-shelf Rack Mount Case With Pro-Grade Features

Gearing up for an event? Now you can get pro-grade rack mount cases in days instead of weeks, guaranteed! Other rack case makers claim to be fully stocked, but dont be surprised if your case order is delayed. Plus, only Pelican maintains inventory on both coasts, reducing your freight cost and transit time.

Vibration is Your Enemy

Drops and impact are an obvious no-no with electronics, but vibration puts damaging repetitive stress on delicate parts and soldered joints. Thats why youll find 8 heavy duty rubber shock mounts to isolate the frame inside the shell. The polymer outer shell absorbs impacts, and the shock mount inside dissipates residual movement. Rack mount cases without shock mounts transfer impact forces directly to the electronics inside.

Universal Mounting

Pelican-Hardigg V-Series Cases are built utilizing a full-boxed 19 steel rack with a industry-standard square hole pattern, so hanging electronics with tab mounts is a snap. These cases also include clip nuts - just attach the clip nut onto a square hole and youve got a secure, threaded mount. We even ship the case with your choice of 10-32 Imperial or M6 Metric clip-nuts.

Clip Nuts

Just attach the 10-32 Imperial or M6 Metric clip nut onto the square hole and you've got a secure, threaded mount.

Manual Purge Valves

allow air pressure to be equalized to the atmosphere. This prevents vacuum lock that can make opening the case difficult.

O-ring Gaskets

located on the lid works with the purge valve to create a fully watertight seal.

Classic-V vs. Super-V

Whats the difference? Weve drawn on decades of rack mount case experience to produce two tiers of performance.

The Pelican-Hardigg Classic-V Series has a 33 depth frame and has longer shock mounts and a larger sway space between the rack and shell. This case also has 4 removable heavy-duty casters and stainless steel handles. Extra insurance if your equipment frequently ships via freight services.

SHARED FEATURES

A. Double Walled Rim for Tongue-in-Groove Sealremains sealed after impact, splash, rain, air and watertight resistant.

B. Lid Hangerkeeps lids attached to case while case is open.

C. Shock Mountsprovide excellent shock and vibration cushion for delicate equipment.

D. Coupling Catchesattaching system for secure stacking.

E. Manual Purge Valveallows air pressure to be equalized to the atmosphere.

F. Positive Anti-Shear Locksprevent lid separation upon impact.

    Recessed Hardwareprotected from impact, and snag free transport.

    Black Hardwarenon-reflective black hardware eliminates glare in bright environments.

    Patented Metal Insertscatch and hinge attachment points distribute load to case walls

G. Square Hole 19" Width Rack Framefixed square hole frame for universal equipment fit.

H. Molded-In Stacking Ribssecure non-slip stacking on matched size cases.

    Columnar Strengthmolded-in ribs provide extra columnar strength.

I. Reinforced Corners and Edges15% to 20% thicker corners and edges for added impact protection.

CLASSIC-V

33" (83.8 cm) RACK DEPTH

HEAVY DUTY CASTERS

4 removable heavy duty bottom casters

STAINLESS STEEL HANDLES

heavy-duty spring loaded handles lay flat, and snap back in place after use

LOCKING CABLE CATCHES

allow for padlock attachment to keep case locked and secure

SHOCK MOUNT CASES

40 Years of Pelican Protection

Since 1976, Pelican Products has protected your important equipment. Our products are rigorously tested to ensure the absolute best in protection against vibration, drops, and impact forces. The V-Series rack mount cases are engineered to provide the same level of protection you've come to expect from Pelican.

Protect your gear with V-Series Shockmounts

Pelican V-Series rack mount cases come equipped with case shockmounts to ensure your sensitive equipment is safe. 8 heavy duty rubber shockmounts connect the inside frame to the outer shell, isolating your rack mount equipment from vibration and impact forces.

Specifications

• Two Press and Pull Latches
• Double-layered, Soft-grip Handle
• Two Padlockable Hasps
• Vortex Valve
• Flush Powerful Hinges
• Meets Carry-on Regulations
• Lightweight Strong HPX Resin
• Watertight
• Guaranteed For Life
• Dimensions:
• Interior: (L x W x D) 38.1 x 26.7 x 15.2 cm
• Exterior: (L x W x D) 41.1 x 32.2 x 16.8 cm)