Home battery charger designed for AAA, AA, C, D and 9V NiMH/NiCD cells. Charges 4 batteries at a time (or 2 x 9V batteries at a time) Automatic trickle charge mode ensures cells are not overcharged. *Batteries not included.

Features

• Suitable for AAA, AA, C, D or 9V batteries • Trickle charge mode • LED indicators • Typical charge time for 4 x AA NiMH cells - 8 hours

Recharges high capacity NiMH batteries in under 2 hours! This compact microprocessor controlled charger features an LCD indicating battery charge status. Includes mains power supply and 12VDC car power lead. Note: not suitable for use with low discharge NiMH “Combo” batteries.

• Charges 2 or 4 x AA or AAA batteries at once
• LCD bargraph readout
• Thermal cutout
• Timer/capacity cutout to prevent overcharging
• Short circuit & polarity protected
• Bad cell detection

This latest generation, microprocessor controlled battery charger allows you to recharge standard alkaline batteries up to 20 times. In turn, it helps to reduce the money you spend on batteries and the environmental impact from disposed batteries in landfills. It’s also suitable for NiMH cells, making it a true “do-it-all” charging solution for AA or AAA size batteries. To ensure cells (and the charger) is not damaged, several protective features are inbuilt, including a 4 hour automatic timer, over temperature protection & automatic cutoff when charged. 240V operation.

Batteries not included.

NOTE: It is recommended to charge used Ni-MH / Ni-Cd batteries twice consecutively (or around 8 hours) before use for a more reliable charge.

• Recharge standard alkaline cells up to 20 times
• Also suits NiMH cells
• Charges 2 or 4 x AA or AAA batteries at once
• Automatic cut-off after 4 hours or charge completion
• Over temperature protected
• LED indicators
• Includes mains lead

 

 

Illustration of devices which can be installed into the Multi-Media Bay

 

Easily swap out various types of hard drives and optical media:

 

 

Product Features

 

• A 5 1/4 bay system with a slot for slim optical drive and an integrated Snap-In mobile rack
• Install any slim SATA or ATAPI optical drive and a 3.5" SATA hard drive into a single 5 1/4" drive bay
• Choice of models with no drive or with optical drives pre-installed.
• Hard drive can be added or removed, like tape cassette, via the integrated Snap-In mobile rack on bottom of the bay
  
• Rugged steel construction for rough handling and fast cooling
• Point to point Serial ATA connection (no cable to connect hard drive to enclosure)
  
• Suspension mount to protect against vibration and shock
• Designed for effective air flow
• Hot swappable*, hard drive can be removed or add to the system without restarting*
• Compatible with DOS, all Windows, Mac OS X, Linux and Solaris

 * Serial ATA hot swap feature works only with controllers that support this feature. You may consider adding one of the Addonics Serial ATA host controllers to your systems to ensure the hot swap capability. Controllers from your system may not support this feature. Please verify with your system or controller manufacturer if you need to have hot swap in your application.

  

AEMMCFBY

  

 

 

 

Multi-Media Bay with Compact Flash Adapter

Package content: Multi-Media Bay with Compact Flash Adapter, User guide