A 1 in 5 out amplifier designed to distribute AV sources via component, RGB, S-Video, composite, digital audio via coaxial and analog audio. Suited to commercial installs that require a high definition source to be relayed to multiple screens such as LCD or plasma. Equally suited to domestic multi room applications.

Features:

Component, RGB, S-Video, composite, digital audio, analog audio inputs Loop output for further distribution 1 input into 5 outputs Power supply included

Single input to four output video only splitter.
Distributes video to four devices. BNC connectors.
Power supply:12VDC @ 500mA
Dimensions:49 x 42 x 50mm

Single input to two output video distributor.
Transmits video to two devices to a maximum distance of 300 metres.
Compatible with NTSC or PAL systems.
Video input:0.8 to 1.2V P-P
Video output:1V P-P
Bandwidth:5MHz
Power supply:12VDC @ 100mA
Dimensions:49 x 42 x 50mm

Protect your cameras and associated equipment from high voltage surges with these protection devices. The system appears as an open circuit to transient high voltage surges and prevents these from passing into equipment.

Protect your cameras and associated equipment from high voltage surges with these protection devices. The system appears as an open circuit to transient high voltage surges and prevents these from passing into equipment.

Designed to eliminate cross talk & ground interference on video signals typically caused by differing ground potentials between camera and monitor. In-built balun provides addition immunity to other sources of signal noise eg: data lines, telephones, fluorescent lights, transformers etc. Simply plugs inline with camera and DVR/monitor. 75½ BNC connection.

Helps to correct grainy, blurry and distorted video signals.

Distributes a single power input to nine outputs. With in-built PTC fuses on each output for short circuit protection.

Distributes a single power input to eight outputs. Perfect for splitting a single camera supply to power up to eight cameras.

Designed for powering up to a maximum of nine 12V DC CCTV cameras. Each output is individually fused and can be set on or off via internal jumpers. There is a host of protection on each output to prevent spikes and surges damaging the connected cameras. Separate screw terminals are provided for each circuit. Overall output voltage can be internally adjusted from 11-13V DC. The design includes output current limiting and over voltage protection. Overall total max load is 5A. Housed in a sturdy compact steel enclosure with lockable door. Field wiring access is via a rear panel cutout or 3 conduit knockouts on the side. Indoor use only.

Features

• 90-260V AC mains input • 9 individual fused 12V DC outputs @ 1A each (max 5A total) • Power LED • Supplied with 3 pin mains lead • Short circuit, over current & over voltage protection • Screw terminal connections • 3 x rubber conduit grommets • Dimensions: 165W x 200H x 54Dmm

Single 8A output. Engineered for use in larger security installations requiring power supplies for pan & tilt units, cameras, multiplexers etc. 240V AC input with a rear panel mounted circuit breaker.

This adaptor will convert 20-28V AC or 16-30V DC to a regulated 12V DC output suitable for CMOS and CCD cameras. Supplied with 2.1mm DC output plug and 2 pin terminal block input. Approx length 60mm.

This inline microphone enables audio to be added to any camera installation. Simply plugs inline via the video out and DC power lead. A simple low cost solution for existing installations where audio is required.

Designed to be interfaced with the S 9600 these motorised pan only units can be manually or automatically operated. Both models will pan at approximately 6 ° per second and have a range from 15° to 355°. The S 9607 manually tilts through 90° providing even greater camera coverage. Incorporates high speed, high torque AC motors designed to minimise shudder and provide smooth transitions between sweeps.

Specifications:

Panning speed: 6° per second Panning angle: 15° to 355° Tilt angle: 0-90° Manual Power supply: 24VAC Power consumption: 3 watts Maximum load: 7kg Input connector: BNC

S 9537 Ceiling mount bracket.
S 9538 Accommodates the wall mount bracket supplied with the
S 9665 speed dome and converts it to a pole mount arrangement via two worm drive clamps.
S 9539 Converts the standard wall bracket to a 90° corner mount.

Utilising the latest powerful digital video processing these Linux based digital recorders provide a costeffective solution to replace traditional recording methods. These versatile systems allow remote monitoring of up to 4 cameras locally or remotely via network/internet. Its on-chip operating system makes for reliable operation and minimal set up time. It also means in the event of hard disk failure, no system files or settings are lost. The software allows for a host of recording options including continuous, alarm triggered, motion detect and scheduled. Footage can be recorded at a maximum resolution of 320 x 240 (15fps per camera) in MPEG4 format. The system also features a powerful web server for remote monitoring and display of recorded footage. The recorders are available in two models. S 9339 consists of 2 cards only, which can be installed into an existing PC on your network.

System requirements:
PC with Pentium III 350 Mhz CPU or faster, Pentium III 500Mhz CPU is recommended • 64MB RAM minimum, 128MB recommended • 40-250gb hard disk • 24 bit VGA card with 8MB RAM on board • ADSL

Features

• Embedded Linux operating system • No loss of operating system in event of hard drive failure • Local & remote quad processing modes • View each camera individually • Remote viewing via web server • Brightness and contrast adjustments • Time/date stamping of recorded footage • Administrator & user access control • Video recording options - continuous, scheduled, motion detect, alarm trigger • 4 x alarm inputs for triggering (NO, NC assignable) • 4 x relay outputs

Utilising the latest in powerful digital video processing the S 9334 4 channel recorder provides a cost-effective surveillance solution for up to 4 cameras. With the latest motion detection software provided the card can respond to any activity within monitored zones by triggering your alarm system or dialler. The system will alert you to any unauthorised activity so you no longer have to sit in front of a monitor all day and night.

Remote access is possible via local network or across the internet so you can easily monitor your premises from anywhere in the world. The unit features 4 recording modes, continuous, alarm trigger, motion detect or scheduled. These modes allow flexibility for anyone to set up a user friendly surveillance system in the home or business. Suits just about any PC with a spare PCI slot.

Can be monitored and controlled remotely via modem or internet with password protection.

Features:

• Windows 98SE / ME / 2000 / XP support • MPEG4 compression • Quad or full screen display modes (up to 16 way display with multiple cards) • Remote access • Disk array backup support • Pan, Tilt, Zoom camera support • 4 sensor inputs • 3 relay outputs • Video archival management software • Each camera can be assigned an event trigger (alarm input, motion detection, sensor relay) • Multiple motion detection zones for each camera • User access control • Up to 7.5fps per camera @ 320 x 240 in 24 bit colour • Multiple cards may be used in a single machine to provide up to 16 camera inputs • Requirements: Pentium 3 600Mhz 64mb of RAM, 20Gb of HDD space

This transmitter allows one video and one audio signal to be transmitted over long distances via Cat 5 UTP cable. This eliminates the losses associated with coaxial cable and allows transmission up to 2400m (B+W and colour). The receiver has two video outputs and one audio output. Powered by 12VDC @ 500mA. Package includes transmitter, receiver and power supply.

Allows long distance transmission of power, mono audio and video signals for use in CCTV installations. Connection via RJ45.

No power required to operate.

This 4 way video sender transmits video signals over long distances. It replaces the need to use expensive coaxial cable by using one Cat 5 UTP cable instead of 4 individual coaxial cables. It can transmit four channels of video up to 600m (B+W) or 300m (colour). BNC camera connections. No external power supply required. Two identical units are required to form a link.

This transmitter allows a video, stereo audio signal plus power to be transmitted over long distances via Cat 5 UTP cable. This eliminates the expense and losses associated with long runs of coaxial cable. Also eliminates the requirement for remote power at the signal source. It allows transmission up to 300m (B+W and colour).

This unit does not require power to operate (it is passive). It simply sends the power down the cat5 (eg: you can use any power supply that the camera requires).

Package includes two transceiver units and power adaptor lead.

Transmits power and video signals down a single run of Cat5e cable (50 - 100m long). Ideal for using existing cabling for security purposes, or to cut down installation costs (compared to coaxial cabling). Includes receiver & transmitter. Note: Unit requires no power to operate, it will relay 9-24V AC/DC power via Cat5 cable. Sold in a pair.

A passive UTP (Cat5 data cable) video transmitter. Plugs directly onto the back of a camera or DVR via BNC connection. In-built noise filter reduces video lines and unwanted interference. In addition to the S 9244, the S 9246 is also equipped with a surge protection lead which is connected to ground.

Maximum distance 300m colour, 600m black and white. Suitable for use with any unshielded twisted pair cable.

Dimensions: 45 x 21 x 15mm

A passive UTP (Unshielded Twisted Pair - Cat5 Data Cable) video transmitter. Plugs directly onto the back of a camera or DVR via BNC connection. In-built noise filter reduces video lines and unwanted interference.

Maximum distance 300m colour, 600m black and white. Suitable for use with any unshielded twisted pair cable.

Dimensions: 45 x 21 x 15mm

Allows video transmission over UTP (Unshielded Twisted Pair - Cat5 Data Cable). Applications include LCD monitors, plasma screens & projectors. 3 x RCA socket inputs. Transmission distance up to 300m. Two identical units are required to form a link.

Suitable for switching between an AV source and a TV aerial. Great for connecting older TV sets to new AV equipment. Could be used for connecting DVD players, game consoles, video or security cameras. Frequency agile over channels 21 to 107. Channel is indicated via the front panel LED display. Requires 12VDC 300mAh (M 9271 plugpack).

Suitable for switching between an AV source and a TV aerial. Great for connecting DVD players, game consoles, video or security cameras to an early model TV set via its antenna input socket. Frequency VHF channel 1 with inbuilt antenna booster. Includes power supply.

Allows a CCD camera with or without audio to be connected to a TV which has only an aerial connection (no A/V inputs). Requires M 9271 Plugpack 12V DC @ 300mA.

Designed to operate at extremely low light levels, down to 0.003 Lux. It features on-screen display, auto iris DC & video drive, backlight compensation and mirror imaging. Uses C or CS mount lenses.

Features:

• Picture freeze • Negative image • AGC • Horizontal / vertical mirror function • Electronic shutter & iris with auto or manual control • 2 x Digital zoom • Motion detect output • On screen display • Internal/external sync • Auto / manual white balance. • 1V p-p 75Ω video output • Selectable (on/off) backlight compensation • Auto electronic shutter • Auto white balance • DC/Video auto iris

Specifications:

Resolution: 480 lines Input Voltage: 12V DC / 24V AC Image Sensor: 1/3" CCD Video System: CCIR Dimensions(mm): 111 x 51 x 51 Electronic Shutter: 1/120000 S/N Ratio: >52dB Light Sensor: 0.003 Lux Auto Gain Control: On/Off/Manual Suggested Power Supply: M 9243/ M 9370

This network video camera can broadcast a single channel of video and audio across the internet (or intranet), it is excellent for security applications as well as worldwide video conferencing. With its own built in CPU the camera can provide streaming video over a LAN at 352 x 288 resolution and 25 frames per second (fps). The maximum frame rate using the RS-232 connection is 4 fps. Audio transmission is built in to provide clear sound when video conferencing. Output is totally adjustable providing settings for image size, quality, bit rate and maximum bandwidth. The camera can start transmission or email snapshots when audio/motion is detected or an external sensor is triggered (via input on rear of camera). Supplied with 3.6mm manual iris lens, but may be fitted with other video or direct drive auto iris lenses if required. Requires M 8934 12V 1.5A power supply.

Pixels:352 x 288 max (30fps max)
Resolution:420 lines
Light Sensitivity:1.0 lux
Sensor:1/3” CCD
Relay output:1A @ 24VDC
Dimensions:143 x 94 x 72mm

Features

• Video and audio transmission • MPEG4 compression • RJ45 network connection • HTTP web server inbuilt • Password protection • Software based pan/tilt/zoom camera control • Remote recording software • 1 alarm trigger input, 1 relay output • Adjustable image size, quality and bit rate • Image capture on alarm trigger • Retrieval of captured images via email • FTP / Telnet access • DHCP assignable IP

Featuring a high quality Samsung® sensor this dome camera offers 420 lines of resolution. With its easily adjustable camera it is perfect for retail stores and other commercial applications. Requires M 9243 12V DC 300mA Reg. Supply

Specifications:

Pixels: 512 x 582 Sync: Internal Resolution. 420 lines S/N Ratio: 48dB Video Output: 1V p-p 75 Ohm Input Voltage: 12V DC Reg Video System: CCIR Dimensions(mm): 57 x 87 Focal Length(mm): 3.6 Viewing Angle: 92 degrees Light Sensitivity: 0.3 Lux

Flush mount pinhole lens dome camera in a stylish, low profile aluminium housing. Intended for ceiling mounting. Unobtrusive, low profile design.

Specifications

Pixels: 512 x 582 Resolution: 420 lines S/N Ratio: >46dB Input Voltage: 12VDC Reg. Image Sensor: 1/3" CCD Dimensions: 70Ø x 50 Focal Length: 3.6mm Light Sensitivity: 0.1 Lux A/V Connectors: BNC Suggested power supply: M9243

Stylish low profile CCD camera with ingenious “eye-ball” adjustment. Its unobtrusive design makes it ideal for use in architecturally sensitive areas.
Requires M 9243 12V DC 300mA Reg. supply.

Specifications:

Pixels: 512 x 582 Sync: Internal Resolution. 420 lines S/N Ratio: 48dB Video Output: 1V p-p 75 Ohm Input Voltage: 12V DC Reg Video System: CCIR Dimensions(mm): 76 x 25 Focal Length(mm): 3.6 Viewing Angle: 92 degrees Light Sensitivity: 0.5 Lux

Flush mount & surface mount dome cameras housed in vandal resistant aluminium housings

Specifications

Pixels: 512 x 582 Resolution: 420 lines S/N Ratio: >46dB Input Voltage: 12VDC Reg. Image Sensor: 1/3" CCD Dimensions: 139Ø x 95 Focal Length: 3.6mm Light Sensitivity: 0 Lux A/V Connectors: BNC Suggested power supply: M9243

Flush mount & surface mount dome cameras housed in vandal resistant aluminium housings

Specifications

Pixels: 512 x 582 Resolution: 420 lines S/N Ratio: >46dB Input Voltage: 12VDC Reg. Image Sensor: 1/3" CCD Dimensions: 139Ø x 95 Focal Length: 3.6mm Light Sensitivity: 0.1 Lux A/V Connectors: BNC Suggested power supply: M9243

HN-30 (62mm) Screw-in (Metal) for AF 200mm f4

Incorporating both a CCD camera with audio plus PIR movement detection making it ideal low cost total surveillance solution for the small office, business or home. Very easy to install and connect with all mounting hardware including a unique swivel mounting bracket and connectors supplied. Features N.O. & N.C. switched contacts for triggering an alarm or remotely controlling a VCR/TV for unattended recording. Dimensions: 110L x 70W x 44D. 380 lines resolution. 92° lens.

Specifications:

Pixels: 512 x 582 Sync: Internal Resolution. 380 lines Video Output: 1V p-p 75 Ohm Input Voltage: 12V DC Video System: CCIR

Using only a four wire connection, these mini cameras can be installed so they are virtually undetectable. The composite video output is suitable for direct connection to the video input on a VCR or monitor. The addition of an RF modulator would allow the camera to connect to the antenna input of a TV or VCR. Ideal for use in shop surveillance systems, reversing monitor for large vehicles (vans, trucks, caravans), door monitors, video intercoms, monitoring machinery, video conferences and other security / safety applications.
Both models require 12VDC regulated supply.

380 line resolution. 92° viewing angle, ideal for mounting into tiny areas!

Specifications:

Lens: f2.45mm Sync: Internal Resolution. 400 lines Video Output: 1V p-p 75 Ohm Input Voltage: 12V DC S/N Ratio: 45dB(AGC Off)

Utilising a high quality SONY® sensor these mini cameras are housed in a diecast metal case with a swivel bracket. Fitted with RCA audio and video connections.

Features:

• Simple to install • 3 Wire Connection • Composite Video Output • Small unobtrusive size • Internal regulator

Specifications:

Pixels: 512 x 582 Sync: Internal Resolution. 400 lines S/N Ratio: 45dB Video Output: 1V p-p 75 Ohm Input Voltage: 9V DC Video System: CCIR Dimensions(mm): 31 x 31 Focal Length(mm): 3.6 Viewing Angle: 92 degrees Light Sensitivity: 0.1 Lux

Professional standard camera with high resolution CCD sensor for sharp clear video. This camera uses C or CS mount lenses, available separately. With 2x digital zoom capability, mirror function and auto gain control.

Features:

• 1V p-p 75Ω video output • Selectable (on/off) backlight compensation • Auto electronic shutter • Auto white balance

Specifications

Pixels: 795 x 596 Resolution: 600 lines Input Voltage: 12VDC Reg. Image Sensor: 1/3" CCD Dimensions (LxHxWmm): 38 x 40 x 28 Electronic Shutter: 1/120000 S/N Ratio: >46dB Light Sensitivity: 0.05 Lux Gain Control: Auto Suggested power supply: M9243

Professional standard camera with high resolution CCD sensor for sharp clear video. This camera uses C or CS mount lenses, available separately. With 2x digital zoom capability, mirror function and auto gain control.

Features:

• 1V p-p 75Ω video output • Selectable (on/off) backlight compensation • Auto electronic shutter • Auto white balance

Specifications

Pixels: 512 x 582 Resolution: 420 lines Input Voltage: 12VDC Reg. Image Sensor: 1/3" CCD Dimensions (LxHxWmm): 38 x 40 x 28 Electronic Shutter: 1/120000 S/N Ratio: >46dB Light Sensitivity: 0.1 Lux

With high quality SONY® sensor this camera will operate down to a minimum illumination of 0.1 lux. Features wide 150° lens. Fitted with RCA video connections.12V plugpack supply.

Specifications:

Pixels: 512 x 582 Sync: Internal Resolution. 400 lines S/N Ratio: 45dB Video Output: 1V p-p 75 Ohm Input Voltage: 12V DC Video System: CCIR Dimensions(mm): 31 x 31 Focal Length(mm): 2.54 Viewing Angle: 150 degrees Light Sensitivity: 0.1 Lux

A new high tech solution for video monitoring anywhere in your house. Incredibly easy to set up, no messy wiring or difficult setup procedures! No expertise required!

Features

AV output Adjustable brightness Headphone output Infra red lighting for night use Supplied with 2 plugpacks

Professional cameras with built in 4 channel 2.4GHz transmitter. Excellent for surveillance installations where cabling is a problem. Transmits video up to 100m. 3dB high gain antenna. Features alarm input terminals for external detectors. Suits C/CS mount lenses.
Requires 12VDC 300mA regulated supply.

Specifications

• Pixels: 500x582 • Resolution:380 lines • Input Voltage: 12VDC Reg. • Image Sensor: 1/4" CCD • Dimensions: 103x51x55mm • Light Sensitivity: 1 Lux • Auto Gain Control: On/Off • Operating Range: 100m

Professional cameras with built in 4 channel 2.4GHz transmitter. Excellent for surveillance installations where cabling is a problem. Transmits video up to 100m. Supplied with 3dB high gain antenna. Features alarm input terminals for external detectors. Suits C/CS mount lenses. Requires 12VDC 300mA regulated supply.

Specifications

• Pixels: 500x582 • Resolution:380 lines • Input Voltage: 12VDC Reg. • Image Sensor: 1/4" CCD • Dimensions: 103x51x55mm • Light Sensitivity: 0.1 Lux • Auto Gain Control: On/Off • Operating Range: 100m

Colour dome camera with built in 4 channel 2.4GHz transmitter. Great for surveillance installations where cabling is a problem. Transmits video up to 100m. 3dB high gain antenna.

Door strike for controlling building access points. Reversible design suits left or right hand hinged doors. Slimline design makes it suitable for most metal door frames. Available in either fail-secure (power unlocking) or fail-safe (power locking) configurations. Power must not be constantly applied to the strike.
Operating current: 360mA @ 12V DC.
S 5388 - Unlocked in power failure for emergency doors

Suits metal door frames.

Door strike for controlling building access points. Reversible design suits left or right hand hinged doors. Slimline design makes it suitable for most metal door frames. Available in either fail-secure (power unlocking) or fail-safe (power locking) configurations. Designed to be powered momentarily ie: long enough to “buzz” somebody into a premises. Power must not be constantly applied to the strike. Operating current: 360mA @ 12V DC. Locked in power failure for access doors

Suits metal door frames.

If you need to control entry points to a building automatically, it is highly likely that you will need a quality door strike. Once power is applied to the strike , the latch releases and the door can be pushed open. This strike will operate from nominal 12V AC or DC, making it ideal for just about any application. It has a “fail secure” configuration, which means if the power goes off, the strike will remain locked. Note: Designed to be powered momentarily ie: long enough to “buzz” somebody into a premises. Power must not be constantly applied to the strike. Operating current: 800mA Power consumption: 10W

Ideal for security doors, building entrance / exits, secured stock areas, after hours access, garage, etc.

This handy entry alert system sounds whenever its infra red beam is broken. It is ideal for shops, receptions and sales areas. The extended 7 metre range is perfect for wide sliding/automated doors. The in-built speaker can be switched between alarm, chime and off modes. Volume adjustment is provided and an LED counter can be plugged into the module to provide a useful count of the days customers. Power supply included.

Features:

• Retro-reflective beam sensor • 7 metre detection range • ‘Ding-dong’ or siren sound • Adjustable speaker volume, plus off setting • Adjustable siren length 3-30 seconds • 9V DC operation • Pluggable design, no hard wiring required • Optional counter available, ideal for shops • Includes mounting brackets