Device |
|
Product Type |
Mini PTZ |
Maximum Resolution |
3MP |
Application Environment |
Outdoor |
Image Sensor |
Progressive Scan CMOS |
Sensor Size |
1/3 " |
Effective Pixels |
2048(H) X 1536(V) (3.15 MP) |
Day / Night |
Yes |
Low Light Sensitivity |
Standard |
Minimum Illumination |
Color: 0.1 lux at F1.8 (30 IRE , 2400 K); B/W: 0.05 lux at F1.8 (30
IRE, 2400 K) |
Color to B/W Switch |
ISP based switch, configurable |
Mechanical IR Cut Filter |
Yes |
IR Sensitivity Range |
700-1100nm |
IR LED |
No |
Electronic Shutter |
1/5-1/2000sec (manual mode); 1/5-1/10000sec (auto
mode) |
Horizontal Resolution (TV Lines) |
1500 TVL |
S/N Ratio |
52 dB |
|
|
Lens |
|
Focal Length |
Zoom, f4.9-49mm |
Aperture |
F1.8-F3.0 |
Zoom Ratio |
10x optical |
Zoom Speed |
2 sec (wide to tele) |
Zoom Application |
Camera Installation, Auto Zoom by Event, Manual
Operation |
Iris |
DC iris |
Focus |
Auto focus |
Lens Mount |
Board mount |
Horizontal Viewing Angle |
49.6 - 5.6 |
Vertical Viewing Angle |
32.3 - 4.1 |
|
|
PTZ |
|
Manual Panning / Tilting Speed |
0.1 - 190/sec, 0.1 - 150/sec |
Preset Panning/Tilting Speed |
0.1 - 190/sec, 0.1 - 150/sec |
Panning Range |
-175~175 |
Tilting Range |
0~180 (with E-flip) |
PTZ Control |
Remote manual control, 10 preset tours, Auto
scan |
Preset Accuracy (Panning/Tilting) |
1.5/1.5 |
Absolute Position |
Yes |
Pan, Tilt or Zoom protocol |
Visca, Pelco-D, Pelco-P, ACTi URL command |
|
|
Video |
|
Compression |
H.264 (Baseline/ Main/ High profile), MJPEG |
Maximum Frame Rate vs. Resolution |
20 fps at 2048 x 1536 |
|
30 fps at 1920 x 1080 |
|
30 fps at 1280 x 720 |
|
30 fps at 800 x 600 |
|
30 fps at 640 x 480 |
|
15 fps at 320 x 240 |
Multi-Streaming |
Simultaneous dual streams based on two
configurations |
Bit Rate |
28Kbps - 6Mbps (per stream) |
Bit Rate Mode |
Constant, Variable |
Wide Dynamic Range |
Superior WDR (110 dB) |
Image Enhancement |
White Balance, Brightness, Contrast, Sharpness, Automatic gain control,
Flickerless |
Digital Noise Reduction |
2D + 3D DNR |
Privacy Mask |
4 configurable regions for each of 17 preset
points |
Text Overlay |
Yes |
VMS-based Analytics |
Object Counting, People Counting, Face Detection, Object Based Motion
Detection, Tamper, Line Crossing, Enter Area, Missing Object, Unattended
Object, Smoke Detection, Heat Map, Dwell time, Direction Detection,
License Plate Recognition, People Queue management, (Require PC-based or
standalone IVS or ALPR Server. Contact ACTi support for recommendations on
how to maximize analytical accuracy) |
Image Orientation |
Flip, Mirror |
|
|
Audio |
|
Audio Type |
2-way, Line-in, Line-out |
Audio Compression |
8 kHz, 16 bit encoding, Mono, PCM, G.711 |
|
|
Network |
|
Network Protocol & Service |
IPv4/v6, TCP, UDP, DHCP, PPPoE, HTTP, HTTPS, DNS, DDNS, NTP, RTP, RTSP,
RTCP, SMTP, FTP, IGMP, ICMP, ARP, Bonjour, UPnP, QoS, SNMP, IEEE
802.1X |
Ethernet Port |
1 x RJ-45 connector |
Security |
IP address filtering, HTTPS encryption, Password protected user level,
Anonymous login, IEEE 802.1X network access
control |
|
|
Event |
|
Event Trigger |
Video motion detection (3 regions), External device through digital
input, Sound detection |
Event Response |
Notify control center, Go to PTZ preset point or preset tour, Change
camera settings, Command other devices, E-mail notification with
snapshots, Push notification to mobile device, Save video to local
storage, Upload video or snapshot to FTP server, Upload video to NVR
server, Activate external device through digital
output |
|
|
Integration |
|
Unified Solution |
Fully compatible with ACTi software |
Software Development Kit |
Yes |
GPS Position |
Manual setting |
ONVIF Compliant |
Yes, Profile S, Profile G |
GB28181 Compliant |
Yes |
Web Browser |
IE 9.0 or newer, Firefox with VLC, Chrome with VLC, Safari with
QuickTime |
Auto Firmware Upgrade |
Yes |
|
|
Interface |
|
Audio Interface |
Terminal block |
Local Storage |
MicroSDHC, MicroSDXC memory card slot (card not
included) |
Digital Input/Output |
1/1 |
|
|
General |
|
Power Source |
DC 12V, PoE Class 3 (IEEE802.3af) |
Power Consumption |
12.2 W (PoE, heater and fan on) |
Weight |
1306g (2.88lb) |
Environmental Casing |
Weatherproof (IP67), Vandal proof (IK10) |
Mount Type |
Surface, Gang Box, Flush, Pendant, Converter for NPT Standard Mounts,
Wall Mount, Pole Mount, Corner Mount |
Fan |
Yes |
Heater |
Yes |
Starting Temperature |
-30C ~ 50C (-22F ~ 122F) within 30 minutes |
Operating Temperature |
-40C ~ 50C (-40F ~ 122F) |
Operating Humidity |
10% - 85% RH |
Warranty |
3 Year(s)* (3 months in continuous motion) |
Approvals |
CE, FCC, IP67, IK10, NEMA 4X, UL (for optional PoE injector and power
adapter) |
Extended Warranty |
2 Year(s)* (3 months in continuous
motion) |