Sekonic Flash Master L-358 - User-Friendly Affordable Meter With Advanced Features And Optional Wireless Triggering

Since its introduction, Sekonici??s L-358 Flash Master has become the best-selling digital flash meter in its class. Weather-sealed against the nastiest of working conditions, the L-358 delivers dead-nuts accurate flash and ambient light reading in both incident and reflected modes.

For mixed lighting scenarios, the L-358 displays the combined exposure values of both flash and ambient light sources, including the percentage of flash in total exposure in 10-percent increments. Dual ISO buttons allow for quick exposure factoring when working with two differing film speeds, film and Polaroids, or other situations where comparison readings are desired.

The head of the L-358 swivels 270-degrees allowing you to i??walk the seti?? while maintaining constant visual contact with the LCD display. An indigo, backlit LCD screen with large text and icons allows for easy referencing under all lighting conditions.

Incident readings of three-dimensional subjects are taken using the Lumisphere, which can be retracted for selective, narrower-field readings such as contrast ratios for flash lighting. For reflective readings, simply replace the Lumisphere with the Lumigrid (included), which reads the center 54-degrees of the scene. For reflected spot metering, 1, 5, and 10-degree viewfinder spot attachments are available as optional accessories. Up to nine exposure readings can be stored and i??taggedi?? on the LCDi??s analog scale. Electronic flash exposures can be taken wirelessly or with a PC cord. Plug in the optional Sekonic RT-32 Radio Transmitter Module and you can wirelessly trigger any PocketWizard-enabled flash system within a 100i?? range.

The Sekonic L-358 displays an f-stop range of f/1.0 to f/90.9, and a shutter speed range of 30-minutes to 1/8000th-of-a-second (1/1000th in Flash mode), both of which can be displayed in full, half, and third-stop intervals to mirror your camerai??s exposure display. When set to i??fulli??, the exposure is displayed in tenth-of-a-stop increments with repeat accuracy of +/- 0.1 EV.

For motion picture applications, the L-358 calculates cine readings from 2 to 360 frames-per-second. As with all Sekonic meters, the Sekonic L-358 Flash Master includes a 3-year warranty and the best customer support youi??re ever likely to find.

User-friendly, affordable meter with advanced features and Optional Wireless Triggering triggering.

Type:	Digital exposure meter for ambient and flash light
Light receiving method:	Incident light and reflected light
Incident light:	Convertible to flat diffuser (Lumisphere in down position)
Reflected light:	Light receiving angle 54i?? (Lumigrid)
Light receptor element:	2-Silicon photo diodes (incident and reflected)

Ambient light:	Aperture priority metering Shutter priority metering EV metering
Flash:	With synchro cord (cumulative and non-cumulative) Without synchro cord (cumulative and non-cumulative) Measurement using the optional wireless flash radio triggering system (cumulative and non-cumulative)

Radio technology:	Complex 16/24 bit digitally coded
Range:	Up to 100 feet from transmitter to receiver
Channels:	1 to 16 channels standard, 17 to 32 i??Quad Triggeringi??
Radio wave frequency:
USA & Canada (FCC & IC)	CH1-CH16 344.00MHz CH17-CH32 346.50~354.00MHz
Europe (EU)	CH1-CH16 433.62MHz CH17-CH32 434.22MHz

Ambient light:	Incident light EV-2 to EV 22.9 Reflected light EV-2 to EV 22.9 (with 54i?? Lumigrid) Optional Spot: 1o EV5 to EV 24.4, 5o & 10o EV2 to EV 24.4
Flash:	Incident light f/1.0 to f/90.9 (approx. f/124) Reflected light f/1.0 to f/90.9 (approx. f/124) (with 54 Lumigrid) Optional Spot: 1o f/8.0 to f/124, 5o & 10o f/2.8 to f/124
Repeat Accuracy:	+/- 0.1 EV or less
Calibration Constant:	Incident light metering: Lumisphere C = 340 Retracted Lumisphere C = 250 Reflected light metering: K = 12.5

 

Film Speed:	ISO 3 to 8000 (in 1/3 steps)
Shutter Speeds :	Ambient light: 30 minutes to 1/8000 seconds (in 1, 1/2 or 1/3 stop) also 1/200, 1/400 Cine speeds- 2, 3, 4, 6, 8, 12, 16, 18, 24, 25, 30, 32, 36, 40, 48, 50, 60, 64, 72, 96, 120, 128, 150, 200, 240, 256, 300, 360 frames per second (at a 180 degree shutter angle) Flash: 30 minutes to 1/1000 second (in 1, 1/2 or 1/3 stop) also 1/75, 1/80, 1/90, 1/100, 1/200, 1/400
Aperture:	f/1.0 to f/90.9 (in 1/10, 1/2 or 1/3 stop)
EV:	EV -9.9 to EV 40.1 (in 1/10 stop)
Analog Scale:	Aperture: f/1.0 to f/90 (in 1/2 stop) Shutter speed: 2s to 4k (1/4000) (in 1/2 stop)

All-weather feature:	JIS standard water resistance class 4, splash-proof type
Memory function:	9 readings Memory clear recall function
Multiple Flash function:	Up to infinity flash readings (Only one digit is displayed when the cumulative number is ten or more.)
Average function:	Up to 9 readings can be averaged
Brightness Difference function:	+/- 9.9 EV (in 1/10 stop)
Flash analyzing function:	0 to 100% in 10% in increments
Exposure Out of Range:	Eu (underexposure) or Eo (overexposure) indication
Exposure compensation:	+/- 9.9 EV (in 1/10 steps)
Calibration compensation:	+/- 1.0 EV (in 1/10 steps)
Battery Power Indicator display:	with a status symbol
Auto Power Off:	20 minutes after last use
Auto illumination:	EV 6 and under
DIP switch mode selection
Second ISO film speed setting:	ISO 3 to 8000 (in 1/3 stop)
Battery used:	one CR123A battery (3V Lithium dry cell)
Operating temperature range:	14 to 122 F (-10 to 50C)
Storage temperature range:	-4 to 140 F (-20 to 60C)
Dimensions:	2.4"W x 6.1"H x 1.5"D (60mmW x 155mmH x 37mmD)
Weight:	5.4oz (153gm) with battery
Standard accessories supplied:	Lumigrid, Soft case, strap, synchro terminal cap, CR123A Lithium battery

 

L7: 1 | TM: 0 | LM: 2 | TY: 2 | T: 579